flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

USGS updates National Seismic Hazard Maps

USGS updates National Seismic Hazard Maps

Sixteen states deemed ‘high risk’ in latest revision


By BD+C Staff | July 30, 2014
Illustration: USGS
Illustration: USGS

The U.S. Geological Service recently released an update of U.S. National Seismic Hazard Maps that reflect the latest analysis of where future earthquakes will occur, how frequently they may occur, and their strength.

While all states have some potential for earthquakes, 42 of the 50 states have a reasonable chance of experiencing damaging ground shaking from an earthquake in the next 50 years. Sixteen states have a relatively high likelihood of experiencing damaging ground shaking. These states have historically experienced earthquakes with a magnitude 6 or greater. The hazard is especially high along the west coast, intermountain west, and in several active regions elsewhere such as near New Madrid, Mo., and near Charleston, S.C.

The eastern U.S. has the potential for larger and more damaging earthquakes than considered in previous maps and assessments. This finding is due to what scientists learned following the magnitude 5.8 earthquakes that struck Virginia in 2011. It was among the largest earthquakes to occur along the east coast in the last century, and indicated that even larger events in the region are possible.

The maps are used in risk analyses calculated using factors such as population levels, building exposure, and building construction practices. These assessments are used for establishing building codes, in the analysis of seismic risk for key structures, and in determining insurance rates. They can also aid emergency preparedness plans, and private property decisions such as re-evaluating one’s real estate and making it more resilient.

(http://www.usgs.gov/blogs/features/usgs_top_story/new-insight-on-the-nations-earthquake-hazards/)

Related Stories

Codes and Standards | May 16, 2016

EPA proposes new stormwater discharge regulations for construction sites

Would apply to sites of one or more acres.  

Roofing | May 16, 2016

New guide focused on increasing energy and structural performance with raised-heel trusses

Higher trusses simplify attic ventilation, leave more space for insulation.  

Codes and Standards | May 11, 2016

Current California seismic codes provide safety, resiliency, but needed upgrades present challenge

Los Angeles requires seismic retrofits, but other cities do not.  

Codes and Standards | May 10, 2016

Apple spars with Cupertino, Calif., mayor over strained city infrastructure

Apple’s new ‘spaceship’ campus project prompts questions about whether the company should pay more to offset traffic woes.

Codes and Standards | May 9, 2016

Safety Stand-Down yields proposals to boost construction safety

One example: Gilbane encourages safety harnesses for all working above 6 feet.  

Codes and Standards | May 9, 2016

EcoDistricts unveils sustainable neighborhood framework

Focus is on equity, resilience, and climate protection.  

School Construction | May 3, 2016

Florida clamps down on school construction spending

Critics fear rules will hamper ability to build schools with desired features.  

Resiliency | May 2, 2016

Connecticut to develop new code standards for resiliency

Expected more frequent severe weather events due to climate change prompts review.  

Contractors | Apr 29, 2016

OSHA issues advisory to protect workers from Zika virus

Construction industry workers considered at high risk.  

Codes and Standards | Apr 28, 2016

New research finds 30 measures to significantly cut energy use

ASHRAE’s prescription cuts across all building types and climates.  

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021