flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

USGS updates National Seismic Hazard Maps

USGS updates National Seismic Hazard Maps

Sixteen states deemed ‘high risk’ in latest revision


By BD+C Staff | July 30, 2014
Illustration: USGS
Illustration: USGS

The U.S. Geological Service recently released an update of U.S. National Seismic Hazard Maps that reflect the latest analysis of where future earthquakes will occur, how frequently they may occur, and their strength.

While all states have some potential for earthquakes, 42 of the 50 states have a reasonable chance of experiencing damaging ground shaking from an earthquake in the next 50 years. Sixteen states have a relatively high likelihood of experiencing damaging ground shaking. These states have historically experienced earthquakes with a magnitude 6 or greater. The hazard is especially high along the west coast, intermountain west, and in several active regions elsewhere such as near New Madrid, Mo., and near Charleston, S.C.

The eastern U.S. has the potential for larger and more damaging earthquakes than considered in previous maps and assessments. This finding is due to what scientists learned following the magnitude 5.8 earthquakes that struck Virginia in 2011. It was among the largest earthquakes to occur along the east coast in the last century, and indicated that even larger events in the region are possible.

The maps are used in risk analyses calculated using factors such as population levels, building exposure, and building construction practices. These assessments are used for establishing building codes, in the analysis of seismic risk for key structures, and in determining insurance rates. They can also aid emergency preparedness plans, and private property decisions such as re-evaluating one’s real estate and making it more resilient.

(http://www.usgs.gov/blogs/features/usgs_top_story/new-insight-on-the-nations-earthquake-hazards/)

Related Stories

| Nov 6, 2013

Task force to examine resiliency in the face of climate change

President Barack Obama recently signed an executive order related to climate change and disaster-management efforts during severe weather events and other disasters.

| Nov 6, 2013

USGBC Northern California chapter focuses on improving indoor environments in green buildings

The Northern California branch of the U.S. Green Building Council is leading the “Building Health Initiative” that seeks to improve the indoor environment of green buildings.

| Oct 31, 2013

OSHA enacts 47-day extension for comment period on silica-exposure rule

The Occupational Safety and Health Administration has extended the public comment period on its silica-dust exposure rule by 47 days.

| Oct 31, 2013

Updates to California’s building codes take effect Jan. 1

Green-building and accessibility are the major themes of the 2013 updates to California’s construction codes that are set to take effect Jan. 1.

| Oct 31, 2013

IECC code updates include better lighting controls and new HVAC technology

The proposed new code will increase the mandatory installation of occupancy sensors and daylighting controls to many new types of spaces.

| Oct 31, 2013

Effects of green, white roofs to be compared at Walmart in Oregon

Portland State University will construct a 40,000 sf green roof research site on the top of a new Walmart store in North Portland, Ore., and compare it to a 52,000 sf section of roof with a white membrane.

| Oct 31, 2013

GSA okays Green Globes; USGBC counters forestry industry concerns

Green Globes, a LEED rival, was recently declared to be nearly equal with LEED standards by the General Services Administration.

| Oct 25, 2013

California struggles with updated seismic codes

In California, there are still hundreds of concrete buildings that need reinforcement to bring them up to the new seismic code.

| Oct 24, 2013

Supplement No. 2 to AISC 358-10 Prequalified Moment Connection Standard available for public review

Supplement No. 2 to the American Institute of Steel Construction (AISC) standard Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications (AISC 358-10) is now available for public review.

| Oct 24, 2013

Changes in LEED v4 will have large impact on materials manufacturers

Changes to LEED in LEED v4 are so dramatic that they will send ripples into other industries and shift expectations on sustainability reporting and performance far beyond the building industry.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021