flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

USGS updates National Seismic Hazard Maps

USGS updates National Seismic Hazard Maps

Sixteen states deemed ‘high risk’ in latest revision


By BD+C Staff | July 30, 2014
Illustration: USGS
Illustration: USGS

The U.S. Geological Service recently released an update of U.S. National Seismic Hazard Maps that reflect the latest analysis of where future earthquakes will occur, how frequently they may occur, and their strength.

While all states have some potential for earthquakes, 42 of the 50 states have a reasonable chance of experiencing damaging ground shaking from an earthquake in the next 50 years. Sixteen states have a relatively high likelihood of experiencing damaging ground shaking. These states have historically experienced earthquakes with a magnitude 6 or greater. The hazard is especially high along the west coast, intermountain west, and in several active regions elsewhere such as near New Madrid, Mo., and near Charleston, S.C.

The eastern U.S. has the potential for larger and more damaging earthquakes than considered in previous maps and assessments. This finding is due to what scientists learned following the magnitude 5.8 earthquakes that struck Virginia in 2011. It was among the largest earthquakes to occur along the east coast in the last century, and indicated that even larger events in the region are possible.

The maps are used in risk analyses calculated using factors such as population levels, building exposure, and building construction practices. These assessments are used for establishing building codes, in the analysis of seismic risk for key structures, and in determining insurance rates. They can also aid emergency preparedness plans, and private property decisions such as re-evaluating one’s real estate and making it more resilient.

(http://www.usgs.gov/blogs/features/usgs_top_story/new-insight-on-the-nations-earthquake-hazards/)

Related Stories

| Dec 18, 2013

ASHRAE publishes 2013 thermal comfort standard

Major revisions for design and measurement of comfortable spaces are included in a newly published ASHRAE 2013 thermal comfort standard.

| Dec 11, 2013

Texas to require architects to be fingerprinted to get licensed

Starting January 1, 2014, architects who apply for an occupational license in Texas will have to share their fingerprints with the state.

| Dec 11, 2013

Province of Ontario is reviewing bill to require timely payments to contractors

Legislation is under review in the Province of Ontario that would mandate timely payments to contractors.

| Dec 11, 2013

Federal design-build proposal could make it easier for small businesses to land government contracts

The Design-Build Efficiency and Jobs Act, a bill pending in the U.S. House of Representatives, would streamline the bid and proposal process by requiring government agencies to use a two-step process when seeking design-build contracts for projects worth more than $750,000.

| Dec 11, 2013

NIST recommends tougher standards for tornado resilience

Buildings in tornado-prone areas should be constructed to withstand strong winds just as hurricanes are factored into building codes in coastal areas, says a federal report examining the 2011 killer tornado in Joplin, Mo.

| Dec 10, 2013

Whistleblowers can now file complaints online with OSHA

Whistleblowers covered by one of 22 statutes administered by the Occupational Safety and Health Administration (OSHA) now will be able to file complaints online.

| Dec 4, 2013

Five U.S. cities leading on climate change initiatives

Houston, Salt Lake City, Miami, New York, and Los Angeles are five cities that are leading the way on preparing for climate change and extreme weather, according to a Center for American Progress report.

| Dec 4, 2013

Philadelphia City Council mulling bill requiring ID cards for construction workers

The Philadelphia City Council has held a series of hearings on a bill aimed at boosting the city's safety regulations in the wake of a deadly building collapse earlier this year.

| Dec 4, 2013

Changes completed on 2015 IECC provisions

The 2015 International Energy Conservation Code (IECC)—the code that serves as the model for states’ codes—has undergone final changes.

| Dec 4, 2013

Design-build makes gains along with more authorizing legislation

In 2009, more legislation authorizing design-build project delivery passed than in any year in Design Build Institute of America’s history.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021