The modernization of a mid-century Midtown Manhattan office tower features a new façade intended to improve occupant comfort and reduce energy consumption. The building, at 666 Fifth Avenue, was originally designed by Carson & Lundin.
First opened in November 1957 when it was considered cutting-edge, the original façade of the 500-foot-tall modernist skyscraper was highly inefficient by today’s energy efficiency standards. Using an early version of a semi-unitized curtain wall, the old façade featured units with punched aluminum panels on the bottom and a single glass pane on top. This was advantageous in its light weight, but yielded poor energy efficiency. The project team chose a full reskinning as the best option to upgrade the aging building.
The new façade features the largest single-pane units ever used on an office development in New York City, according to a blog post at KPF.com. These large panes created efficiencies in construction, logistics, and structural detailing. Panel fabricators used a single cut, yielding only minimal waste when producing each unit. Situated inside a four-sided shadowbox, the panels span the full width between columns and the full height between floors. This approach tripled the window area, bringing in plentiful daylight for tenants.
Other improvements on the 1.2 million-sf office tower include:
- Mechanical upgrades for high-efficiency heating and air systems that draw in greater quantities of fresh air.
- A reconstructed lobby with modernized elevators that will support a retail space.
- Numerous columns and low ceilings were eliminated from office floors to maximize interior space.
- Some units offer double-height spaces and interconnected floors, taking advantage of the building’s wide range of floor plate sizes.
- Designers used existing massing—a podium and tower interspersed with multiple setbacks—to create exterior terraces at multiple levels on three sides.
“One of the important aspects of an adaptive reuse project is finding the existing value in a building, and identifying areas that can create more desirable space for users," said KPF Principal Lauren Schmidt, AIA, LEED AP BD+C. "The existing façade at 660 Fifth Avenue was one of the first curtain wall systems when it was built in the 1950s and very modern at the time, but it had limitations in terms of thermal and acoustical insulation, as well as small windows. We approached the façade as a clean slate and proposed opening it up completely with units that would span column to column. This, in a sense, allowed the columns to disappear and create open views. It was a great opportunity to propose something that was perhaps considered atypical, but actually, as we worked through the logistics of it, made sense for a number of reasons and was highly efficient.”
On the team:
Client: Brookfield Properties
Design Architect (full services): Kohn Pedersen Fox (KPF)
MEP Engineer: Cosentini Associates
Structural Engineer: Gilsanz Murray Steficek (GMS)
General contractor: Turner Construction
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/2_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/7_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/3_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/6_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/8_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/9_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/11_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/13_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/15_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/14_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/21_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/19_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![29_Before 666 Fifth Avenue_Credit Hayes Davidson Courtesy KPF.jpg](/sites/default/files/inline-images/29_Before%20666%20Fifth%20Avenue_Credit%20Hayes%20Davidson%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/25_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/28_660%20Fifth%20Avenue_Credit%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/27_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/24_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
Related Stories
| Oct 4, 2011
GREENBUILD 2011: Methods, impacts, and opportunities in the concrete building life cycle
Researchers at the Massachusetts Institute of Technology’s (MIT) Concrete Sustainability Hub conducted a life-cycle assessment (LCA) study to evaluate and improve the environmental impact and study how the “dual use” aspect of concrete.
| Oct 3, 2011
Balance bunker and Phase III projects breaks ground at Mitsubishi Plant in Georgia
The facility, a modification of similar facilities used by Mitsubishi Heavy Industries, Inc. (MHI) in Japan, was designed by a joint design team of engineers and architects from The Austin Company of Cleveland, Ohio, MPSA and MHI.
| Sep 30, 2011
Kilbourn joins Perkins Eastman
Kilbourn joins with more than 28 years of design and planning experience for communities, buildings, and interiors in hospitality, retail/mixed-use, corporate office, and healthcare.
| Sep 28, 2011
Opus Group awarded contract for new Church & Dwight Co. headquarters
The campus will include two 125,000-sf Class A, energy-efficient office buildings that will be designed and constructed with sustainable practices and elements.
| Sep 26, 2011
Copper helps serve and protect Lightning Alley
Copper grounding upgrades add protection and reliability to Florida Sheriff's Department.
| Sep 23, 2011
Smart windows installed at NREL
The self-tinting heat-activated filter allows solar heat into the building when it is desired, such as on a sunny winter day.
| Sep 23, 2011
Wall Street adage proving true for the office market
Sale prices for office buildings enjoyed a moderate bounce to the upside, following the financial crisis of 2007 - 2008.
| Sep 20, 2011
Francis Cauffman wins two IDA design awards
The PA/NJ/DE Chapter of the International Interior Design Association (IIDA) has presented the Francis Cauffman architecture firm with two awards: the Best Interior Design of 2011 for the W. L. Gore offices in Elkton, MD, and the President’s Choice Award for St. Joseph’s Regional Medical Center in Paterson, NJ.
| Sep 16, 2011
Electrical installation work completed at Rhode Island DMV
The facility was renovated in order to better the working environment for DMV employees and streamline the experience for Rhode Island drivers.
| Sep 14, 2011
USGBC L.A. Chapter's Green Gala features Jason McLennan as keynote speaker
The Los Angeles Chapter of the nonprofit USGBC will launch its Sustainable Innovation Awards this year during the chapter's 7th Annual Green Gala on Thursday, November 3.