The modernization of a mid-century Midtown Manhattan office tower features a new façade intended to improve occupant comfort and reduce energy consumption. The building, at 666 Fifth Avenue, was originally designed by Carson & Lundin.
First opened in November 1957 when it was considered cutting-edge, the original façade of the 500-foot-tall modernist skyscraper was highly inefficient by today’s energy efficiency standards. Using an early version of a semi-unitized curtain wall, the old façade featured units with punched aluminum panels on the bottom and a single glass pane on top. This was advantageous in its light weight, but yielded poor energy efficiency. The project team chose a full reskinning as the best option to upgrade the aging building.
The new façade features the largest single-pane units ever used on an office development in New York City, according to a blog post at KPF.com. These large panes created efficiencies in construction, logistics, and structural detailing. Panel fabricators used a single cut, yielding only minimal waste when producing each unit. Situated inside a four-sided shadowbox, the panels span the full width between columns and the full height between floors. This approach tripled the window area, bringing in plentiful daylight for tenants.
Other improvements on the 1.2 million-sf office tower include:
- Mechanical upgrades for high-efficiency heating and air systems that draw in greater quantities of fresh air.
- A reconstructed lobby with modernized elevators that will support a retail space.
- Numerous columns and low ceilings were eliminated from office floors to maximize interior space.
- Some units offer double-height spaces and interconnected floors, taking advantage of the building’s wide range of floor plate sizes.
- Designers used existing massing—a podium and tower interspersed with multiple setbacks—to create exterior terraces at multiple levels on three sides.
“One of the important aspects of an adaptive reuse project is finding the existing value in a building, and identifying areas that can create more desirable space for users," said KPF Principal Lauren Schmidt, AIA, LEED AP BD+C. "The existing façade at 660 Fifth Avenue was one of the first curtain wall systems when it was built in the 1950s and very modern at the time, but it had limitations in terms of thermal and acoustical insulation, as well as small windows. We approached the façade as a clean slate and proposed opening it up completely with units that would span column to column. This, in a sense, allowed the columns to disappear and create open views. It was a great opportunity to propose something that was perhaps considered atypical, but actually, as we worked through the logistics of it, made sense for a number of reasons and was highly efficient.”
On the team:
Client: Brookfield Properties
Design Architect (full services): Kohn Pedersen Fox (KPF)
MEP Engineer: Cosentini Associates
Structural Engineer: Gilsanz Murray Steficek (GMS)
General contractor: Turner Construction
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/2_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/7_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/3_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/6_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/8_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/9_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/11_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/13_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/15_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/14_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/21_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/19_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![29_Before 666 Fifth Avenue_Credit Hayes Davidson Courtesy KPF.jpg](/sites/default/files/inline-images/29_Before%20666%20Fifth%20Avenue_Credit%20Hayes%20Davidson%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/25_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/28_660%20Fifth%20Avenue_Credit%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/27_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/24_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
Related Stories
| Oct 18, 2011
Dow Building Solutions invests in two research facilities to deliver data to building and construction industry
State-of-the-art monitoring system allows researchers to collect, analyze and process the performance of wall systems.
| Oct 17, 2011
Big D Floor covering supplies to offer Johnsonite Products??
Strategic partnership expands offering to south and west coast customers.
| Oct 17, 2011
Schneider Electric introduces UL924 emergency lighting control devices
The emergency lighting control devices require fewer maintenance costs and testing requirements than backup batteries because they comply with the UL924 standard, reducing installation time.
| Oct 14, 2011
AISC develops new interoperability strategy to move construction industry forward
AISC is working to bring that vision to reality by developing a three-step interoperability strategy to evaluate data exchanges and integrate structural steel information into buildingSMART's Industry Foundation Classes.
| Oct 12, 2011
Vertical Transportation Systems Reach New Heights
Elevators and escalators have been re-engineered to help building owners reduce energy consumption and move people more efficiently.
| Oct 12, 2011
Building a Double Wall
An aged federal building gets wrapped in a new double wall glass skin.
Office Buildings | Oct 12, 2011
8 Must-know Trends in Office Fitouts
Office designs are adjusting to dramatic changes in employee work habits. Goodbye, cube farm. Hello, bright, open offices with plenty of collaborative space.
| Oct 12, 2011
FMI’s Construction Outlook: Third Quarter 2011 Report
Construction Market Forecast: The general economy is seeing mixed signs.
| Oct 11, 2011
Pink light bulbs donated to Society of Memorial Sloan-Kettering Cancer Center
For every Bulbrite Pink Light Bulb that is purchased through the Cancer Center Thrift Shop, 100% of the proceeds will be donated to help support breast cancer research, education, screening, and treatment.
| Oct 11, 2011
ThyssenKrupp elevator cabs validated by UL Environment
The conclusive and independent third-party validation process is another step toward a green product line.