The modernization of a mid-century Midtown Manhattan office tower features a new façade intended to improve occupant comfort and reduce energy consumption. The building, at 666 Fifth Avenue, was originally designed by Carson & Lundin.
First opened in November 1957 when it was considered cutting-edge, the original façade of the 500-foot-tall modernist skyscraper was highly inefficient by today’s energy efficiency standards. Using an early version of a semi-unitized curtain wall, the old façade featured units with punched aluminum panels on the bottom and a single glass pane on top. This was advantageous in its light weight, but yielded poor energy efficiency. The project team chose a full reskinning as the best option to upgrade the aging building.
The new façade features the largest single-pane units ever used on an office development in New York City, according to a blog post at KPF.com. These large panes created efficiencies in construction, logistics, and structural detailing. Panel fabricators used a single cut, yielding only minimal waste when producing each unit. Situated inside a four-sided shadowbox, the panels span the full width between columns and the full height between floors. This approach tripled the window area, bringing in plentiful daylight for tenants.
Other improvements on the 1.2 million-sf office tower include:
- Mechanical upgrades for high-efficiency heating and air systems that draw in greater quantities of fresh air.
- A reconstructed lobby with modernized elevators that will support a retail space.
- Numerous columns and low ceilings were eliminated from office floors to maximize interior space.
- Some units offer double-height spaces and interconnected floors, taking advantage of the building’s wide range of floor plate sizes.
- Designers used existing massing—a podium and tower interspersed with multiple setbacks—to create exterior terraces at multiple levels on three sides.
“One of the important aspects of an adaptive reuse project is finding the existing value in a building, and identifying areas that can create more desirable space for users," said KPF Principal Lauren Schmidt, AIA, LEED AP BD+C. "The existing façade at 660 Fifth Avenue was one of the first curtain wall systems when it was built in the 1950s and very modern at the time, but it had limitations in terms of thermal and acoustical insulation, as well as small windows. We approached the façade as a clean slate and proposed opening it up completely with units that would span column to column. This, in a sense, allowed the columns to disappear and create open views. It was a great opportunity to propose something that was perhaps considered atypical, but actually, as we worked through the logistics of it, made sense for a number of reasons and was highly efficient.”
On the team:
Client: Brookfield Properties
Design Architect (full services): Kohn Pedersen Fox (KPF)
MEP Engineer: Cosentini Associates
Structural Engineer: Gilsanz Murray Steficek (GMS)
General contractor: Turner Construction
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/2_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/7_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NY Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/3_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/6_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/8_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/9_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/11_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/13_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/15_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/14_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/21_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue, NYC. Photo: Raimund Koch, courtesy KPF](/sites/default/files/inline-images/19_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![29_Before 666 Fifth Avenue_Credit Hayes Davidson Courtesy KPF.jpg](/sites/default/files/inline-images/29_Before%20666%20Fifth%20Avenue_Credit%20Hayes%20Davidson%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/25_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/28_660%20Fifth%20Avenue_Credit%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/27_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
![660 Fifth Avenue_Credit Raimund Koch Courtesy KPF](/sites/default/files/inline-images/24_660%20Fifth%20Avenue_Credit%20Raimund%20Koch%20Courtesy%20KPF.jpg)
Related Stories
| Oct 11, 2011
Ballard Spahr launches real estate recovery group
The new group represents an expansion of the company’s Distressed Real Estate Initiative, which was launched in 2008 to help clients throughout the country plan, adapt and prosper in a challenging economic environment.
| Oct 11, 2011
Onex completes investment in JELD-WEN
With the completion of the JELD-WEN investment, Onex Partners III is approximately 40% invested.
| Oct 7, 2011
GREENBUILD 2011: UL Environment releases industry-wide sustainability requirements for doors
ASSA ABLOY Trio-E door is the first to be certified to these sustainability requirements.
| Oct 7, 2011
GREENBUILD 2011: UL Environment clarifies emerging environmental product declaration field
White paper defines EPD, details development process, and identifies emerging trends for manufacturers, architects, designers, and buyers.
| Oct 6, 2011
GREENBUILD 2011: Growing green building market supports 661,000 green jobs in the U.S.
Green jobs are already an important part of the construction labor workforce, and signs are that they will become industry standard.
| Oct 6, 2011
GREENBUILD 2011: Kingspan Insulated Panels spotlights first-of-its-kind Environmental Product Declaration
Updates to Path to NetZero.
| Oct 5, 2011
GREENBUILD 2011: Johnson Controls announces Panoptix, a new approach to building efficiency
Panoptix combines latest technology, new business model and industry-leading expertise to make building efficiency easier and more accessible to a broader market.
| Oct 5, 2011
GREENBUILD 2011: Sustainable construction should stress durability as well as energy efficiency
There is now a call for making enhanced resilience of a building’s structure to natural and man-made disasters the first consideration of a green building.
| Oct 5, 2011
GREENBUILD 2011: Solar PV canopy system expanded for architectural market
Turnkey systems create an aesthetic architectural power plant.
| Oct 4, 2011
GREENBUILD 2011
Click here for the latest news and products from Greenbuild 2011, Oct. 4-7, in Toronto.