flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

North Carolina will stop relying on FEMA flood mapping

Codes and Standards

North Carolina will stop relying on FEMA flood mapping

State will identify flood zones on its own.


By Peter Fabris, Contributing Editor | July 23, 2020

Courtesy Pixabay

North Carolina officials will not rely on FEMA to identify high-risk flood zones.

Instead, the state will strive to compile its own data. Officials say FEMA maps have not been updated quickly enough based on recent experience. As proof, they say that more than 77% of homes damaged by Hurricane Matthew in 2016 were not located in federally designated flood zones.

When a home is rebuilt after suffering storm damage, state officials are going beyond a federal block grant program requirement that homes be elevated two feet above FEMA’s base flood elevation. They are using the high-water mark that inspectors find in the home as the point from which the home is raised two feet.

A 2017 report by the Department of Homeland Security’s Inspector General found that 58% of flood maps nationwide were either outdated or inaccurate. At least 22 states and hundreds of local communities already require new construction to be elevated higher than federal requirements, according to the Weather Channel.

Related Stories

Codes and Standards | Feb 24, 2017

Scant data hampering energy, water efficiency at sports venues

New NIBS report says baseline information needs further development.

Codes and Standards | Feb 22, 2017

Plans for WELL Building Standard include linkage with other green building standards

The planned updated version will be customizable for any building type.

Codes and Standards | Feb 21, 2017

Aging building code inspectors and government belt-tightening could cause crisis

Inspectors are edging toward retirement with no understudies in place.

Codes and Standards | Feb 20, 2017

AISI publishes three new cold-formed steel framing research reports

Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.

Codes and Standards | Feb 17, 2017

New energy design guide for metal building systems now available

The second edition incorporates more recent IECC and ASHRAE standards.

Codes and Standards | Feb 14, 2017

Paper outlines how BREEAM credits can be used for WELL standard compliance

The paper provides guidance on how to streamline pursuit of dual certification.

Codes and Standards | Feb 14, 2017

Evidence mounts on health, productivity benefits of sustainable work spaces

High-performance green buildings are linked to better job performance.

Codes and Standards | Feb 13, 2017

Calif. commission approves ‘emergency’ balcony code changes

The changes apply to multifamily, hotels, state-owned buildings, and public schools.

Codes and Standards | Feb 9, 2017

Google-initiated program aims to get construction industry to use healthier building materials

Portico platform features a database of products ranked on how they disclose ingredients.

Codes and Standards | Feb 7, 2017

Newer structural standards mitigating earthquake impacts in Oklahoma

Buildings constructed in the last two decades are largely holding up to increased seismic activity.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021