North Carolina officials will not rely on FEMA to identify high-risk flood zones.
Instead, the state will strive to compile its own data. Officials say FEMA maps have not been updated quickly enough based on recent experience. As proof, they say that more than 77% of homes damaged by Hurricane Matthew in 2016 were not located in federally designated flood zones.
When a home is rebuilt after suffering storm damage, state officials are going beyond a federal block grant program requirement that homes be elevated two feet above FEMA’s base flood elevation. They are using the high-water mark that inspectors find in the home as the point from which the home is raised two feet.
A 2017 report by the Department of Homeland Security’s Inspector General found that 58% of flood maps nationwide were either outdated or inaccurate. At least 22 states and hundreds of local communities already require new construction to be elevated higher than federal requirements, according to the Weather Channel.
Related Stories
Codes and Standards | Mar 14, 2017
Timber Innovation Act to promote tall wood buildings introduced in Congress
The measure has bipartisan support.
Codes and Standards | Mar 13, 2017
U.S. House and Senate have voted to repeal Dept. of Labor’s 'blacklisting' rule
The rule mandates labor compliance review for federal construction contractors.
Codes and Standards | Mar 9, 2017
WiredScore forms Connectivity Advisory Committee
The committee's creation is an important step forward for the group that evaluates internet connectivity in buildings.
Codes and Standards | Mar 8, 2017
New guide examines multifamily high-performance ventilation
The focus is on cost and performance of various systems.
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.