“The Wired Certification Guidelines for Commercial Developments and Redevelopments,” reportedly the only manual of its kind, was released this month.
Published by WiredScore, the guide covers how to optimally design for mobile capacity planning, conduit points of entry, electrical resiliency, and flexibility to adopt new building technologies. Designed to be used by architects, engineers, and developers during design and construction phases, the document outlines Wired Certification criteria and best practices to meet the technology needs and expectations of future tenants.
WiredScore developed criteria based on evaluation of over 900 commercial office buildings across the United States and United Kingdom, while also referencing best practices developed by experts in real estate, technology, and telecommunications.
The standards can significantly simplify design and could eliminate the need to retrofit buildings to meet new technological demands such as smart building technology, Arie Barendrecht, founder and CEO of WiredScore, told GlobeSt. The manual is available for free download at: http://blog.wiredscore.com/con
Related Stories
Codes and Standards | Dec 8, 2021
Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede
City aims to increase housing as projections point to sharp population increase.
Codes and Standards | Dec 7, 2021
Design problems now the primary cause of construction claims and disputes
More likely to occur due to more tight timescales imposed upon third parties engaged in design.
Codes and Standards | Dec 5, 2021
New standard for Phase I environmental reports requires more research work on many sites
Update affects around 250,000 commercial real estate transactions a year.
Codes and Standards | Nov 30, 2021
Dept. of Energy publishes RFP for technical assistance on supporting better building codes
Addresses advanced standards to reduce energy consumption and GHG emissions.
Codes and Standards | Nov 29, 2021
Ithaca, N.Y., votes to electrify, decarbonize all its buildings
First initiative of its kind in U.S.
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.
