Each year, when the calendar strikes August 25, the operations of Perrault Farms kick into high gear.Ā
For the next 35 days, the Toppenish, Wash., facilities operate around the clock to harvest, dry, bale and chill the hops that will be sold to commercial and craft brewers worldwide. Ā Ā
āItās a very perishable crop,ā says Steve Perrault, president of the fourth-generation family business. āHops are kind of like a wine grapeāwhen theyāre ready, theyāre ready, and we need to be very efficient at processing them.ā
Perrault commissioned new metal buildings to replace the businessā previous cramped and outdated facilities. The buildings are designed to support maximum productivity during the cropās brief harvesting season. Ā Ā
A 19,530 square-foot hop kiln building is the first stop for the green hop cones after they are stripped from the vines. In this building, propane furnaces blow hot air on the cones to remove excess moisture. The entire process takes about nine hours, 25 percent faster than at the previous facility. Ā Ā
āWeāve cut down our drying time, which has also reduced our propane use and electricity substantially, so itās a much more sustainable facility,ā Perrault says.Ā
After drying, the cones are transported via conveyor to the adjacent 26,000 square-foot hop baling building, where they begin to cool. Ambient air blows through vented air trenches within the concrete floor slab, reducing cone temperature while eliminating the risk of spontaneous combustion.Ā
Ā
Ā
A four-foot cupola extending the full length of the building allows the moist, hot air to escape out of the roof.Ā
Next, the hop cones are compressed into 200-pound bales, stacked and transported by conveyor to the buildingās refrigerated cold room where the temperature is reduced to 28 degrees Fahrenheit.
A second-story office area and conference room at the center of the building overlooks the baling operations, providing a powerful sales tool. The facility also includes a laboratory used in the businessā hop-breeding program as well as an onsite pilot brewery where new varieties of hops can be tested.Ā
The exteriors of both buildings feature metal panels, reinforced concrete tilt-up panels with exposed aggregate finish, and a standing seam metal roof. Ā
āThe panels around the buildings contribute to the architectural design and also protect the structures from damage from forklifts and tractors as they maneuver around the site,ā says Steve Young, general manager of Concord Construction, the Star builder in Wapato, Wash., that oversaw construction. āThe concrete also adds structural strength to the hop baling building when the hops are cooling.āĀ
Extensive use of metal liner wall panels contributes to the structureās interior aesthetics, and the interior space also features hot dipped galvanized structural steel on all frames, columns and rafters so they wonāt be susceptible to rusting from the excess moisture in the air.Ā
The project also includes a 7,500 square-foot equipment cover building.Ā
Because the new facilities process significantly more hops than the previous ones, Perrault Farms has been able to increase the acreage of crops it plants by more than 30 percent.Ā
The new buildings also accommodate the stricter food safety guidelines required by craft brewers, which typically use fresh hops in their brewing process.
āWith the craft brewing industry growing so rapidly, food safety is very important to all of us,ā Perrault says.
The new complex has definitely impressed other hop farmers in the Yakima Valley, the largest hops-producing region in the U.S.Ā
āEverybody who has gone through the buildings is amazed; itās one of the top facilities in the industry right now,ā Perrault says. āThis is something I had to do for the next generations coming up.āĀ
Project construction was completed in 10 months.
āBy going with metal buildings from Star Buildings, it really decreases the construction time, which also makes it more cost-effective,ā Young says.
Related Stories
Codes and Standards | Feb 12, 2015
New Appraisal Institute form aids in analysis of green commercial building features
The Instituteās Commercial Green and Energy Efficient Addendum offers a communication tool that lenders can use as part of the scope of work.Ā
Office Buildings | Feb 12, 2015
Is Houston headed for an office glut?
More than 13 million sf could be completed this year, adding to this metroās double-digit vacancy woes.
Modular Building | Feb 12, 2015
New shipping container complex begins construction in Albuquerque
The Green Jeans Farmery already has a hydroponic farm component courtesy of owner and entrepreneur Roy Solomon.
Transit Facilities | Feb 12, 2015
Gensler proposes network of cycle highways in Londonās unused underground
Unused tube lines would host pedestrian paths, cycle routes, cultural spaces, and retail outlets.
Healthcare Facilities | Feb 11, 2015
Primer: Using 'parallel estimating' to pinpoint costs on healthcare construction projects
As pressure increases to understand capital cost prior to the first spade touching dirt, more healthcare owners are turning to advanced estimating processes, like parallel estimating, to improve understanding of exposure, writes CBRE Healthcare's Andrew Sumner.
Transportation & Parking Facilities | Feb 11, 2015
11 of the nationās best āComplete Streetsā policies of 2014
Austin, Texas, and Troy, N.Y., are among the cities with the strongest safe streets policies, according to a new report.
Sponsored | Roofing | Feb 11, 2015
New school blends with local architecture using Petersen metal roof
Perkins Eastman in Stamford, Conn., designed the school to emphasize and integrate the International Baccalaureate curriculum throughout.
Mixed-Use | Feb 11, 2015
Developer plans to turn Eero Saarinen's Bell Labs HQ into New Urbanist town center
Designed byĀ Eero Saarinen in the late 1950s, the two-million-sf, steel-and-glass buildingĀ was oneĀ of the best-funded and successful corporate research laboratories in the world.
Architects | Feb 11, 2015
Shortlist for 2015 Mies van der Rohe Award announced
Copenhagen, Berlin, and Rotterdam are the cities where most of the shortlisted works have been built.Ā
BIM and Information Technology | Feb 10, 2015
Google's 3D scanning camera leaves the lab
Google is said to be partnering with LG to create a version of the technology for public release sometime this year.