The Douglas County Community and Senior Center offers a variety of recreational activities, programs and events. Their mission is to continue to positively affect the community and enrich life. The community center is somewhere people of all ages and lifestyles are able to gather to promote unity, healthy living, education and community pride.
Problem
In Douglas County, 30 percent of the 46,000 residents are senior citizens; thus the need for a senior community center had been vocalized for decades. In 1995, the Kahle Community Center was built for the lake portion of Douglas County. This left the larger population of Carson Valley without similar services and community activities. Therefore the Douglas County Board of Commissioners determined that the time to act was now, and the Douglas County Community and Senior Center was built. It is one of the largest projects accepted by Douglas County, consisting of nearly 80,000 square feet.
Solution
The Douglas County Community and Senior Center, completed in July 2014, was built to become the focal point of the community as a whole for all ages and continues to create and preserve quality parks and recreation opportunities. The facility was designed by Tate Snyder Kimsey Architecture and offers many amenities including conference and meetings rooms and a gym and fitness center with two full basketball courts, an indoor track, exercise equipment, two racquetball courts and so much more. It is a state of the art building for a commendable community.
Commercial Roofers, Inc. installed MBCI’s Craftsman™ Series and Artisan® Series, both in Galvalume, PBC panels in Slate Gray and flat sheet panels in Galvalume and Slate Gray.
Core Construction, the general contractors on the project, selected PBC metal panels for the roof and exterior walls. The PBC panels were attached to the building structure with exposed fasteners. Photovoltaic (PV) panels were installed on top of the PBC roof panels. A PV system’s efficiency improves when installed on a cool metal roof, as done with the Douglas Center, increasing the energy output of the solar modules.
The Craftsman Series panels were tapered and installed on the roof of the cylinder section of the building. The Craftsman Series is a snap-on batten roof system, available in small, large and high profiles. Craftsman Series – Small Batten panels were used on this facility because the vertical legs of the panel are only ¾” long, allowing it to curve to the shape of the cylinder.
MBCI’s Artisan Series panels were used as soffit panels on the community center. The simplicity of the Artisan Series panel is its best design feature because its uniform dimensions and smooth look allow the designer to plan modules, eliminating complicated pieces and following wall curvatures. The fastener is concealed behind the flush face, creating a clean appearance.
Lastly, Commercial Roofers, Inc. used MBCI’s 24-gauge flat sheets to make their own trim onsite.
Project Specs
MBCI Products: PBC, Artisan® Series, Craftsman™ Series - Small Batten, Flat Sheets
Location: Minden, Nevada
Color: Slate Gray and Galvalume
Coverage: 78,000 sq. ft.
Architect: Tate Snyder Kimsey Architecture; Reno, Nevada
Roofing Contractor: Commercial Roofers, Inc. Las Vegas, Nevada
General Contractor: Core Construction Services of Nevada Inc., Reno, Nevada
Related Stories
| Jul 18, 2014
2014 Giants 300 Report
Building Design+Construction magazine's annual ranking the nation's largest architecture, engineering, and construction firms in the U.S.
| Jul 7, 2014
7 emerging design trends in brick buildings
From wild architectural shapes to unique color blends and pattern arrangements, these projects demonstrate the design possibilities of brick.
| Jul 2, 2014
Emerging trends in commercial flooring
Rectangular tiles, digital graphic applications, the resurgence of terrazzo, and product transparency headline today’s commercial flooring trends.
| Jun 30, 2014
Research finds continued growth of design-build throughout United States
New research findings indicate that for the first time more than half of projects above $10 million are being completed through design-build project delivery.
| Jun 18, 2014
Arup uses 3D printing to fabricate one-of-a-kind structural steel components
The firm's research shows that 3D printing has the potential to reduce costs, cut waste, and slash the carbon footprint of the construction sector.
| Jun 12, 2014
Austrian university develops 'inflatable' concrete dome method
Constructing a concrete dome is a costly process, but this may change soon. A team from the Vienna University of Technology has developed a method that allows concrete domes to form with the use of air and steel cables instead of expensive, timber supporting structures.
| May 29, 2014
7 cost-effective ways to make U.S. infrastructure more resilient
Moving critical elements to higher ground and designing for longer lifespans are just some of the ways cities and governments can make infrastructure more resilient to natural disasters and climate change, writes Richard Cavallaro, President of Skanska USA Civil.
| May 20, 2014
Kinetic Architecture: New book explores innovations in active façades
The book, co-authored by Arup's Russell Fortmeyer, illustrates the various ways architects, consultants, and engineers approach energy and comfort by manipulating air, water, and light through the layers of passive and active building envelope systems.
| May 19, 2014
What can architects learn from nature’s 3.8 billion years of experience?
In a new report, HOK and Biomimicry 3.8 partnered to study how lessons from the temperate broadleaf forest biome, which houses many of the world’s largest population centers, can inform the design of the built environment.
| May 13, 2014
19 industry groups team to promote resilient planning and building materials
The industry associations, with more than 700,000 members generating almost $1 trillion in GDP, have issued a joint statement on resilience, pushing design and building solutions for disaster mitigation.