flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Construction material prices drop slightly in April, extending the decline

Construction material prices drop slightly in April, extending the decline


By Jim Haughey, BD+C Economist and Chief Economist with Reed Construction Data | August 11, 2010
This article first appeared in the 200906 issue of BD+C.

The construction materials price index for nonresidential buildings fell 0.3% in April extending the decline since the September index peak to 13.1%. Prices for the mix of materials used in nonresidential construction prices are back to the December 2007 level before the 14% jump in prices from March through September.

The materials price index is expected to decline slowly for a few more months but be rising modestly again by the end of the year and rising more quickly next year, perhaps up 4–5% from the 2009 average.

April's price drop was led by structural steel (7.3%) and plywood (-3.3%). The only significant April price increases were for diesel (20.5%) and nonferrous pipe and tube (20.9%) which had both declined in March. Rising scrap and ore prices mean rising nonferrous product prices for at least several months. The Energy Department reports that diesel pump prices were unchanged from the April to the May price survey week.

Percent Change in ..... 1 month 3 months 12 months 3 years
Source: Producer Price Index. Bureau of Labor Statistics
Construction commodities
Cement 0.8 -0.2 0.0 6.1
Construction sand, gravel & crushed stone 0.5 1.4 5.5 23.1
Softwood plywood -3.3 -4.9 -12.7 -21.1
Softwood lumber 1.6 -2.6 -10.7 -32.5
Manufactured materials
Gypsum products -0.2 -1.2 5.3 -17.5
Diesel fuel 20.5 -2.6 -56.2 -30.6
Paint 0.1 0.1 12.4 22.5
Plastic construction products -0.5 -0.6 3.0 1.9
Vitreous plumbing fixtures 2.3 2.4 4.2 -1.9
Ceramic tile -2.0 -1.4 -0.2 1.6
Flat glass -0.4 -1.0 2.9 2.7
Hot-rolled bars, plates, and structural shapes -7.3 -15.7 -25.9 -2.0
Extruded aluminum rod, bar, and other shapes 1.2 -4.3 -26.3 -18.2
Architectural metalwork 0.6 -2.4 12.1 24.7
Metal plumbing fixtures 0.5 0.2 2.2 13.1
Builders' hardware 0.5 -2.7 6.8 20.4
Sheet metal products -0.6 -3.6 0.2 9.9
Nonferrous pipe and tube 20.9 26.7 -28.5 -1.3
Building brick 0.5 -0.2 0.1 0.8
Ready-mix concrete -1.0 -1.9 3.4 10.7
Concrete block and brick 0.3 -0.1 3.3 10.1
Millwork (window, door, cabinet) -0.2 0.7 1.7 5.3
Engineered wood products -1.3 -3.3 -2.6 -14.6
Metal doors, sash, and trim -0.8 0.2 5.4 9.2
Summary
Construction materials (commodity level) -2.3 -3.1 -1.7 4.9
Inputs to construction industries -0.4 -1.6 -3.6 6.4
Inputs to nonresidential construction -0.3 -1.6 -5.2 6.3

Related Stories

| Aug 11, 2010

Prism-shaped design unveiled for five-star hotel in Saudi Arabia

Goettsch Partners has been commissioned by Saudi Oger Ltd. to design a new five-star, 214-key business hotel in the King Abdullah Financial District in Riyadh, Saudi Arabia. As a design-build assignment, Saudi Oger is serving as the contractor, selected by developer Rayadah Investment Company. The project is sited on Parcel 1.08, one of the first 10 parcels currently under development in the massive new master-planned district.

| Aug 11, 2010

Data center construction costs are down, according to a study by Environmental Systems Design

The current economic crisis has an up-side for owners of mission-critical facilities: On average, it costs less today to construct a new data center than it did in late 2007, according to a study by Environmental Systems Design (ESD). ESD found that the prices of feeder and cable have dropped by more than half, major data center equipment by 12%, labor and materials by 19.6%, and shipping and handling by 15% from the fourth quarter of 2007 to July 15, 2009.

| Aug 11, 2010

Construction Specifications Institute to end support of MasterFormat 95 on December 31, 2009

The Construction Specifications Institute (CSI) announced that the organization will cease to license and support MasterFormat 95 as of December 31, 2009. The CSI Board of Directors voted to stop licensing and supporting MasterFormat 95 during its June 16, 2009, meeting at the CSI Annual Convention in Indianapolis.

| Aug 11, 2010

Gensler among eight teams named finalists in 'classroom of the future' design competition

Eight teams were recognized today as finalists of the 2009 Open Architecture Challenge: Classroom. Finalists submitted designs ranging from an outdoor classroom for children in inner-city Chicago, learning spaces for the children of salt pan workers in India, safe spaces for youth in Bogota, Colombia and a bamboo classroom in the Himalayan mountains.

| Aug 11, 2010

9 rooftop photovoltaic installation tips

The popularity of rooftop photovoltaic (PV) panels has exploded during the past decade as Building Teams look to maximize building energy efficiency, implement renewable energy measures, and achieve green building certification for their projects. However, installing rooftop PV systems—rack-mounted, roof-bearing, or fully integrated systems—requires careful consideration to avoid damaging the roof system.

boombox1
boombox2
native1

More In Category




Products and Materials

Top products from AIA 2024

This month, Building Design+Construction editors are bringing you the top products displayed at the 2024 AIA Conference on Architecture & Design. Nearly 550 building product manufacturers showcased their products—here are 17 that caught our eye.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021