The construction materials price index for nonresidential buildings fell 0.3% in April extending the decline since the September index peak to 13.1%. Prices for the mix of materials used in nonresidential construction prices are back to the December 2007 level before the 14% jump in prices from March through September.
The materials price index is expected to decline slowly for a few more months but be rising modestly again by the end of the year and rising more quickly next year, perhaps up 4–5% from the 2009 average.
April's price drop was led by structural steel (7.3%) and plywood (-3.3%). The only significant April price increases were for diesel (20.5%) and nonferrous pipe and tube (20.9%) which had both declined in March. Rising scrap and ore prices mean rising nonferrous product prices for at least several months. The Energy Department reports that diesel pump prices were unchanged from the April to the May price survey week.
Percent Change in ..... | 1 month | 3 months | 12 months | 3 years |
Source: Producer Price Index. Bureau of Labor Statistics | ||||
Construction commodities | ||||
Cement | 0.8 | -0.2 | 0.0 | 6.1 |
Construction sand, gravel & crushed stone | 0.5 | 1.4 | 5.5 | 23.1 |
Softwood plywood | -3.3 | -4.9 | -12.7 | -21.1 |
Softwood lumber | 1.6 | -2.6 | -10.7 | -32.5 |
Manufactured materials | ||||
Gypsum products | -0.2 | -1.2 | 5.3 | -17.5 |
Diesel fuel | 20.5 | -2.6 | -56.2 | -30.6 |
Paint | 0.1 | 0.1 | 12.4 | 22.5 |
Plastic construction products | -0.5 | -0.6 | 3.0 | 1.9 |
Vitreous plumbing fixtures | 2.3 | 2.4 | 4.2 | -1.9 |
Ceramic tile | -2.0 | -1.4 | -0.2 | 1.6 |
Flat glass | -0.4 | -1.0 | 2.9 | 2.7 |
Hot-rolled bars, plates, and structural shapes | -7.3 | -15.7 | -25.9 | -2.0 |
Extruded aluminum rod, bar, and other shapes | 1.2 | -4.3 | -26.3 | -18.2 |
Architectural metalwork | 0.6 | -2.4 | 12.1 | 24.7 |
Metal plumbing fixtures | 0.5 | 0.2 | 2.2 | 13.1 |
Builders' hardware | 0.5 | -2.7 | 6.8 | 20.4 |
Sheet metal products | -0.6 | -3.6 | 0.2 | 9.9 |
Nonferrous pipe and tube | 20.9 | 26.7 | -28.5 | -1.3 |
Building brick | 0.5 | -0.2 | 0.1 | 0.8 |
Ready-mix concrete | -1.0 | -1.9 | 3.4 | 10.7 |
Concrete block and brick | 0.3 | -0.1 | 3.3 | 10.1 |
Millwork (window, door, cabinet) | -0.2 | 0.7 | 1.7 | 5.3 |
Engineered wood products | -1.3 | -3.3 | -2.6 | -14.6 |
Metal doors, sash, and trim | -0.8 | 0.2 | 5.4 | 9.2 |
Summary | ||||
Construction materials (commodity level) | -2.3 | -3.1 | -1.7 | 4.9 |
Inputs to construction industries | -0.4 | -1.6 | -3.6 | 6.4 |
Inputs to nonresidential construction | -0.3 | -1.6 | -5.2 | 6.3 |
Related Stories
| Aug 11, 2010
Vytec Yukon Board premium insulated siding offers new design, accessories
Yukon Board Premium Insulated Siding from CertainTeed Corporation’s Vytec brand of vinyl siding products, welcomes a new updated design.
| Aug 11, 2010
Metl-span panels add strength to fitness center
The new Centegra Health Bridge Fitness Center is located on the 40-acre Centegra Health Campus in Huntley, IL. The 120,000 sq. ft. facility presents a high-tech exterior look that features a “running bond” panel pattern plus random placement of two different silver colors of Metl-Span panels. The running bond pattern creates a distinctive appearance by staggering the vertical joints between panels.
| Aug 11, 2010
AAMA leads development of BIM standard for fenestration products
The American Architectural Manufacturers Association’s newly formed BIM Task Group met during the AAMA National Fall Conference to discuss the need for an BIM standard for nonresidential fenestration products.
| Aug 11, 2010
Report: Building codes and regulations impede progress toward uber-green buildings
The enthusiasm for super green Living Buildings continues unabated, but a key stumbling block to the growth of this highest level of green building performance is an existing set of codes and regulations. A new report by the Cascadia Region Green Building Council entitled "Code, Regulatory and Systemic Barriers Affecting Living Building Projects" presents a case for fundamental reassessment of building codes.
| Aug 11, 2010
Call for entries: Building enclosure design awards
The Boston Society of Architects and the Boston chapter of the Building Enclosure Council (BEC-Boston) have announced a High Performance Building award that will assess building enclosure innovation through the demonstrated design, construction, and operation of the building enclosure.
| Aug 11, 2010
Portland Cement Association offers blast resistant design guide for reinforced concrete structures
Developed for designers and engineers, "Blast Resistant Design Guide for Reinforced Concrete Structures" provides a practical treatment of the design of cast-in-place reinforced concrete structures to resist the effects of blast loads. It explains the principles of blast-resistant design, and how to determine the kind and degree of resistance a structure needs as well as how to specify the required materials and details.
| Aug 11, 2010
ACSA announces 2008-2009 ACSA/AISC steel design student competition winners
The Association of Collegiate Schools of Architecture (ACSA) is pleased to announce the winners of the ninth annual steel design student competition for the 2008-2009 academic year. Administered by the Association of Collegiate Schools of Architecture (ACSA) and sponsored by the American Institute of Steel Construction (AISC), the program challenged students, working individually or in teams, to explore a variety of design issues related to the use of steel in design and construction.