The construction materials price index for nonresidential buildings fell 0.3% in April extending the decline since the September index peak to 13.1%. Prices for the mix of materials used in nonresidential construction prices are back to the December 2007 level before the 14% jump in prices from March through September.
The materials price index is expected to decline slowly for a few more months but be rising modestly again by the end of the year and rising more quickly next year, perhaps up 4–5% from the 2009 average.
April's price drop was led by structural steel (7.3%) and plywood (-3.3%). The only significant April price increases were for diesel (20.5%) and nonferrous pipe and tube (20.9%) which had both declined in March. Rising scrap and ore prices mean rising nonferrous product prices for at least several months. The Energy Department reports that diesel pump prices were unchanged from the April to the May price survey week.
| Percent Change in ..... | 1 month | 3 months | 12 months | 3 years |
| Source: Producer Price Index. Bureau of Labor Statistics | ||||
| Construction commodities | ||||
| Cement | 0.8 | -0.2 | 0.0 | 6.1 |
| Construction sand, gravel & crushed stone | 0.5 | 1.4 | 5.5 | 23.1 |
| Softwood plywood | -3.3 | -4.9 | -12.7 | -21.1 |
| Softwood lumber | 1.6 | -2.6 | -10.7 | -32.5 |
| Manufactured materials | ||||
| Gypsum products | -0.2 | -1.2 | 5.3 | -17.5 |
| Diesel fuel | 20.5 | -2.6 | -56.2 | -30.6 |
| Paint | 0.1 | 0.1 | 12.4 | 22.5 |
| Plastic construction products | -0.5 | -0.6 | 3.0 | 1.9 |
| Vitreous plumbing fixtures | 2.3 | 2.4 | 4.2 | -1.9 |
| Ceramic tile | -2.0 | -1.4 | -0.2 | 1.6 |
| Flat glass | -0.4 | -1.0 | 2.9 | 2.7 |
| Hot-rolled bars, plates, and structural shapes | -7.3 | -15.7 | -25.9 | -2.0 |
| Extruded aluminum rod, bar, and other shapes | 1.2 | -4.3 | -26.3 | -18.2 |
| Architectural metalwork | 0.6 | -2.4 | 12.1 | 24.7 |
| Metal plumbing fixtures | 0.5 | 0.2 | 2.2 | 13.1 |
| Builders' hardware | 0.5 | -2.7 | 6.8 | 20.4 |
| Sheet metal products | -0.6 | -3.6 | 0.2 | 9.9 |
| Nonferrous pipe and tube | 20.9 | 26.7 | -28.5 | -1.3 |
| Building brick | 0.5 | -0.2 | 0.1 | 0.8 |
| Ready-mix concrete | -1.0 | -1.9 | 3.4 | 10.7 |
| Concrete block and brick | 0.3 | -0.1 | 3.3 | 10.1 |
| Millwork (window, door, cabinet) | -0.2 | 0.7 | 1.7 | 5.3 |
| Engineered wood products | -1.3 | -3.3 | -2.6 | -14.6 |
| Metal doors, sash, and trim | -0.8 | 0.2 | 5.4 | 9.2 |
| Summary | ||||
| Construction materials (commodity level) | -2.3 | -3.1 | -1.7 | 4.9 |
| Inputs to construction industries | -0.4 | -1.6 | -3.6 | 6.4 |
| Inputs to nonresidential construction | -0.3 | -1.6 | -5.2 | 6.3 |
Related Stories
| Feb 10, 2011
Kohler urinals
Kohler offers urinals with three flush options to fit a variety of applications: standard 1-gallon, pint, or waterless.
| Feb 10, 2011
Moen M•Power electronic faucets
At 0.5 gpm, Moen’s M•Power electronic faucets meet the current standards, and offer features that eliminate waste. Improved electronic sensors reduce reflectivity to stop false sensing, and turn off automatically after 30 seconds. Electronics can be installed above or below deck to accommodate different sink styles.
| Feb 3, 2011
Duro-Last Roofing, Inc. Adds Standing Seam Metal Product Line
Duro-Last Roofing, Inc. is adding a standing seam metal product line to its roofing system offerings. With five profiles and more than thirty colors to choose from, the new line will enable authorized Duro-Last contractors to provide a standing seam roofing installation to meet virtually any aesthetic requirements.
| Jan 25, 2011
Sherwin-Williams Zero-VOC Claim Misleading, Says BBB
In a move that could prompt industry-wide changes to claims about volatile organic compounds (VOCs), the Better Business Bureau’s National Advertising Division (NAD) has told Sherwin-Williams it should stop marketing its Harmony line of paints as “zero-VOC.” Sherwin-Williams said it will accept NAD’s decision and will take the findings into consideration in its future advertising.
| Jan 7, 2011
How Building Teams Choose Roofing Systems
A roofing survey emailed to a representative sample of BD+C’s subscriber list revealed such key findings as: Respondents named metal (56%) and EPDM (50%) as the roofing systems they (or their firms) employed most in projects. Also, new construction and retrofits were fairly evenly split among respondents’ roofing-related projects over the last couple of years.
| Jan 4, 2011
Product of the Week: Zinc cladding helps border crossing blend in with surroundings
Zinc panels provide natural-looking, durable cladding for an administrative building and toll canopies at the newly expanded Queenstown Plaza U.S.-Canada border crossing at the Niagara Gorge. Toronto’s Moriyama & Teshima Architects chose the zinc alloy panels for their ability to blend with the structures’ scenic surroundings, as well as for their low maintenance and sustainable qualities. The structures incorporate 14,000 sf of Rheinzink’s branded Angled Standing Seam and Reveal Panels in graphite gray.
| Jan 4, 2011
Furniture Sustainability Standard - Approved by ANSI and Released for Distribution
BIFMA International recently announced formal American National Standards Institute (ANSI) approval and release of the ANSI/BIFMA e3-2010 Furniture Sustainability Standard. The e3 standard represents a structured methodology to evaluate the "sustainable" attributes of furniture products and constitutes the technical criteria of the level product certification program.
| Dec 7, 2010
Product of the Week: Petersen Aluminum’s column covers used in IBM’S new offices
IBM’s new offices at Dulles Station West in Herndon, Va., utilized Petersen’s PAC-1000 F Flush Series column covers. The columns are within the office’s Mobility Area, which is designed for a mobile workforce looking for quick in-and-out work space. The majority of workspaces in the office are unassigned and intended to be used on a temporary basis.
| Nov 2, 2010
A Look Back at the Navy’s First LEED Gold
Building Design+Construction takes a retrospective tour of a pace-setting LEED project.
