flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Construction material prices drop slightly in April, extending the decline

Construction material prices drop slightly in April, extending the decline


By Jim Haughey, BD+C Economist and Chief Economist with Reed Construction Data | August 11, 2010
This article first appeared in the 200906 issue of BD+C.

The construction materials price index for nonresidential buildings fell 0.3% in April extending the decline since the September index peak to 13.1%. Prices for the mix of materials used in nonresidential construction prices are back to the December 2007 level before the 14% jump in prices from March through September.

The materials price index is expected to decline slowly for a few more months but be rising modestly again by the end of the year and rising more quickly next year, perhaps up 4–5% from the 2009 average.

April's price drop was led by structural steel (7.3%) and plywood (-3.3%). The only significant April price increases were for diesel (20.5%) and nonferrous pipe and tube (20.9%) which had both declined in March. Rising scrap and ore prices mean rising nonferrous product prices for at least several months. The Energy Department reports that diesel pump prices were unchanged from the April to the May price survey week.

Percent Change in ..... 1 month 3 months 12 months 3 years
Source: Producer Price Index. Bureau of Labor Statistics
Construction commodities
Cement 0.8 -0.2 0.0 6.1
Construction sand, gravel & crushed stone 0.5 1.4 5.5 23.1
Softwood plywood -3.3 -4.9 -12.7 -21.1
Softwood lumber 1.6 -2.6 -10.7 -32.5
Manufactured materials
Gypsum products -0.2 -1.2 5.3 -17.5
Diesel fuel 20.5 -2.6 -56.2 -30.6
Paint 0.1 0.1 12.4 22.5
Plastic construction products -0.5 -0.6 3.0 1.9
Vitreous plumbing fixtures 2.3 2.4 4.2 -1.9
Ceramic tile -2.0 -1.4 -0.2 1.6
Flat glass -0.4 -1.0 2.9 2.7
Hot-rolled bars, plates, and structural shapes -7.3 -15.7 -25.9 -2.0
Extruded aluminum rod, bar, and other shapes 1.2 -4.3 -26.3 -18.2
Architectural metalwork 0.6 -2.4 12.1 24.7
Metal plumbing fixtures 0.5 0.2 2.2 13.1
Builders' hardware 0.5 -2.7 6.8 20.4
Sheet metal products -0.6 -3.6 0.2 9.9
Nonferrous pipe and tube 20.9 26.7 -28.5 -1.3
Building brick 0.5 -0.2 0.1 0.8
Ready-mix concrete -1.0 -1.9 3.4 10.7
Concrete block and brick 0.3 -0.1 3.3 10.1
Millwork (window, door, cabinet) -0.2 0.7 1.7 5.3
Engineered wood products -1.3 -3.3 -2.6 -14.6
Metal doors, sash, and trim -0.8 0.2 5.4 9.2
Summary
Construction materials (commodity level) -2.3 -3.1 -1.7 4.9
Inputs to construction industries -0.4 -1.6 -3.6 6.4
Inputs to nonresidential construction -0.3 -1.6 -5.2 6.3

Related Stories

| Nov 15, 2011

Suffolk Construction breaks ground on the Victor housing development in Boston

Project team to manage construction of $92 million, 377,000 square-foot residential tower.

| Nov 10, 2011

Skanska Moss to expand and renovate Greenville-Spartanburg International Airport

The multi-phase terminal improvement program consists of an overall expansion to the airport’s footprint and major renovations to the existing airport terminal.

| Nov 10, 2011

Suffolk Construction awarded MBTA transit facility and streetscape project

The 21,000-sf project will feature construction of a cable-stayed pedestrian bridge over Ocean Avenue, an elevated plaza deck above Wonderland MBTA Station, a central plaza, and an at-grade pedestrian crossing over Revere Beach Boulevard

| Nov 8, 2011

Transforming a landmark coastal resort

Originally built in 1973, the building had received several alterations over the years but the progressive deterioration caused by the harsh salt water environment had never been addressed.

| Nov 8, 2011

WEB EXCLUSIVE: Moisture-related failures in agglomerated floor tiles

Agglomerated tiles offer an appealing appearance similar to natural stone at a lower cost. To achieve successful installations, manufacturers should provide design data for moisture-related dimensional changes, specifiers should require in-situ moisture testing similar to those used for other flooring materials, and the industry should develop standards for fabrication and installation of agglomerated tiles.

| Nov 8, 2011

$11 million business incubator Florida Innovation Hub at the University of Florida completed by Charles Perry Partners, Inc.

The facility houses the UF Office of Technology Licensing, UF Tech Connect, other entities, and more than 30 startup technology tenants.

| Nov 4, 2011

Mortenson Construction builds its fifth wind facility In Illinois

Shady Oaks Wind Farm is under construction near Compton, Ill.

| Nov 1, 2011

Holcim awards winners for North America announced

A socio-architectural project to create regional food-gathering nodes and a logistics network in Canada's high arctic territory won the top prize for North America of $100,000.

| Oct 26, 2011

Metl-Span selected for re-roof project

School remained in session during the renovation and it was important to minimize the disruption as much as possible.

boombox1
boombox2
native1

More In Category

Products and Materials

Top products from AIA 2024

This month, Building Design+Construction editors are bringing you the top products displayed at the 2024 AIA Conference on Architecture & Design. Nearly 550 building product manufacturers showcased their products—here are 17 that caught our eye.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021