The AIA Documents Committee has revamped standard contract documents regarding Building Information Modeling (BIM) and other digital data.
The first standard forms for BIM were released a decade ago, and much has changed regarding BIM practices since then. The 2017 release updates digital practice documents including AIA Document E203–2013, Building Information Modeling and Digital Data Exhibit; AIA Document G201–2013, Project Digital Data Protocol Form; and AIA Document G202–2013, Project Building Information Modeling Protocol Form.
The updated documents are structurally different from their predecessors. They require all members of the building team to agree upon protocols for the transmission and use of instruments of service or other documentation in digital form. They also address the risks and responsibilities associated with sharing project information in digital format.
Members of the building team must spell out requirements for the various elements of the model at various stages of the project. These details should be well documented so that allowed uses of the model and how it is to be used are well understood by all parties.
Revised documents clarify that the contractor may maintain contract documents, change orders, construction change directives, and other modifications at the site in electronic format. The documents also now address the issue of notice in electronic format.
For more information on AIA contract documents, visit: https://www.aiacontracts.org/
Related Stories
| Sep 11, 2013
White paper examines Joint Commission requirements for NFPA codes in healthcare
The healthcare industry has experienced great attention from The Joint Commission concerning fire and life safety issues.
| Sep 11, 2013
San Francisco expected to drop firefighter air tank refilling station rule for skyscrapers
San Francisco is poised to drop a requirement that skyscrapers have refill stations so firefighters can recharge their air tanks during a blaze. The city has required that new high-rises have the air refill systems for about ten years.
| Sep 5, 2013
State legislatures continue to raise the bar on green school construction
Since the beginning of 2013, the USGBC has followed more than 125 bills across 34 states that seek to advance healthy, high-performing schools.
| Sep 5, 2013
Construction industry groups create coalition to respond to new OSHA silica rule
A group of 11 construction trade associations has created the Construction Industry Safety Coalition in response to the Occupational Safety and Health Administration’s (OSHA) proposed rule on silica for the construction industry.
| Sep 5, 2013
Red tape delays California county jail construction projects
California authorized $1.2 billion for jail construction in 2007, but not a single county in the state has completed a jail project since then.
| Sep 5, 2013
New CM-at-risk and design-build options create controversy in Ohio
Some contractors say Ohio's new system puts small and midsize construction companies at a disadvantage.
| Sep 5, 2013
Outdated codes slowed disaster recovery in Tuscaloosa, Ala.
Outdated building codes and lack of a master plan slowed the initial rebuilding stage after a devastating tornado leveled parts of Tuscaloosa, Ala. in 2011, according to the city’s mayor.
| Aug 28, 2013
Building collapse prompts legislation to beef up demolition regulations in Philadelphia
Philadelphia City Council will introduce legislation next month to strengthen the regulation of building demolition practices.
| Aug 28, 2013
Rules requiring contractors to boost hiring of veterans criticized
Some businesses are pushing back against proposed rules requiring federal contractors to step up their hiring of returning military service personnel.
| Aug 28, 2013
OSHA moves to reduced exposure to crystalline silica
Under a proposal from the Occupational Safety and Health Administration, the new permissible exposure limit to crystalline silica per cubic meter of air could be changed from 250 micrograms to 50 micrograms.
