The AIA Documents Committee has revamped standard contract documents regarding Building Information Modeling (BIM) and other digital data.
The first standard forms for BIM were released a decade ago, and much has changed regarding BIM practices since then. The 2017 release updates digital practice documents including AIA Document E203–2013, Building Information Modeling and Digital Data Exhibit; AIA Document G201–2013, Project Digital Data Protocol Form; and AIA Document G202–2013, Project Building Information Modeling Protocol Form.
The updated documents are structurally different from their predecessors. They require all members of the building team to agree upon protocols for the transmission and use of instruments of service or other documentation in digital form. They also address the risks and responsibilities associated with sharing project information in digital format.
Members of the building team must spell out requirements for the various elements of the model at various stages of the project. These details should be well documented so that allowed uses of the model and how it is to be used are well understood by all parties.
Revised documents clarify that the contractor may maintain contract documents, change orders, construction change directives, and other modifications at the site in electronic format. The documents also now address the issue of notice in electronic format.
For more information on AIA contract documents, visit: https://www.aiacontracts.org/
Related Stories
| Sep 26, 2013
EPA’s final rule on updated ASTM standard likely to be withdrawn
The Environmental Protection Agency is expected to withdraw a direct final ruleissued in Augustregarding an ASTM standard for Phase I Environmental Site.
| Sep 26, 2013
A primer on RoofPoint green-rating system for commercial roofs
The RoofPoint green-rating system can be used to construct more energy-efficient and sustainable commercial roofs.
| Sep 26, 2013
ConsensusDocs releases updated federal subcontract to help construction firms perform federal work
The newly revised ConsensusDocs standard subcontract (ConsensusDocs 752 for federal work) will make it easier for general contractors and subcontractors to perform federal work.
| Sep 18, 2013
Proposed Boston casino development approval will depend partly on sustainability
The movement toward green building has been slow to catch on in the casino industry, but that could change with Suffolk Downs, which plans to build a $1 billion casino in Boston.
| Sep 18, 2013
Regulations could ease firefighters’ fear of roof solar panels
The local fire chief says solar panels are partly to blame after a 300,000 sf refrigerated warehouse in Delanco, N.J., burned down.
| Sep 18, 2013
New AISC design guide on structural stainless steel now available
For the first time in the U.S., design professionals now have an authoritative resource on structural stainless steel with AISC Steel Design Guide No. 27, Structural Stainless Steel.
| Sep 18, 2013
DBIA’s ‘Design-Build Done Right’ best practices project seeks industry input
The Design-Build Institute of America (DBIA) is seeking industry input on its project to create a design-build best practices document.
| Sep 11, 2013
USGBC Florida Chapter survey to help contractors adopt sustainable practices
Contractors in Florida could benefit from a data collection project by the state's chapter of the U.S. Green Building Council.
| Sep 11, 2013
Disability, vet hiring standards for contractors are goals, not quotas
Contractors that fall short of new federal hiring rules concerning veterans and disabled persons will not necessarily incur penalties, says Patricia Shiu, director of the Office of Federal Contract Compliance Programs.
| Sep 11, 2013
Sports stadium accidents suggest code updates may be necessary to prevent falls
Since 2000, at least three individuals have died as a result of falling from the upper decks of stadiums in the United States. In addition, eight non-fatal falls have occurred in stadiums and arenas over that time.
