The Gypsum Association has released the 21st edition of the Fire Resistance Design Manual. Revised every three years, GA-600 has been referenced by the model building codes as a source of fire resistive designs for more than 40 years.
The 2015 edition contains nearly 100 new systems that supplement existing assemblies for walls and partitions, floor-ceiling systems, area separation walls, and many others. Among these, are 20 new head-of-wall and base-of-wall systems that significantly expand the options for perimeter relief.
A more interactive digital version of the Fire Resistance Design Manual (FRDM) is available with the 2015 edition. More like an e-reader than previous PDF versions, the new digital manual is searchable, easy to navigate, delivered on demand, and allows users to print specific pages for reference, the association says. Customers who purchase the electronic version will receive a complimentary hardcopy.
The FRDM is referenced by the International Building Code, and The National Fire Codes, as well as many state and local jurisdictions in the U.S. and Canada as a source document for fire-resistance and sound-control rated designs that incorporate gypsum board in a variety of building systems.
Related Stories
Codes and Standards | Dec 8, 2021
Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede
City aims to increase housing as projections point to sharp population increase.
Codes and Standards | Dec 7, 2021
Design problems now the primary cause of construction claims and disputes
More likely to occur due to more tight timescales imposed upon third parties engaged in design.
Codes and Standards | Dec 5, 2021
New standard for Phase I environmental reports requires more research work on many sites
Update affects around 250,000 commercial real estate transactions a year.
Codes and Standards | Nov 30, 2021
Dept. of Energy publishes RFP for technical assistance on supporting better building codes
Addresses advanced standards to reduce energy consumption and GHG emissions.
Codes and Standards | Nov 29, 2021
Ithaca, N.Y., votes to electrify, decarbonize all its buildings
First initiative of its kind in U.S.
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.