flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

2015 gypsum fire resistance design manual released

Codes and Standards

2015 gypsum fire resistance design manual released

The 2015 edition contains nearly 100 new systems that supplement existing assemblies for walls and partitions, floor-ceiling systems, area separation walls, and many others.


By Peter Fabris, Contributing Editor | July 31, 2015
2015 gypsum fire resistance design manual released

Photo courtesy of the Gypsum Association

The Gypsum Association has released the 21st edition of the Fire Resistance Design ManualRevised every three years, GA-600 has been referenced by the model building codes as a source of fire resistive designs for more than 40 years.

The 2015 edition contains nearly 100 new systems that supplement existing assemblies for walls and partitions, floor-ceiling systems, area separation walls, and many others. Among these, are 20 new head-of-wall and base-of-wall systems that significantly expand the options for perimeter relief.

A more interactive digital version of the Fire Resistance Design Manual (FRDM) is available with the 2015 edition. More like an e-reader than previous PDF versions, the new digital manual is searchable, easy to navigate, delivered on demand, and allows users to print specific pages for reference, the association says. Customers who purchase the electronic version will receive a complimentary hardcopy.

The FRDM is referenced by the International Building Code, and The National Fire Codes, as well as many state and local jurisdictions in the U.S. and Canada as a source document for fire-resistance and sound-control rated designs that incorporate gypsum board in a variety of building systems. 

Related Stories

Codes and Standards | Jan 17, 2022

AISC seeks comments on draft earthquake standard for steel buildings

Includes new limits for cross-sectional slenderness of steel columns based on latest research.

Codes and Standards | Jan 12, 2022

California’s wildfire building code significantly reduces structural loss

As other states consider upgrading their codes, Golden State provides useful model.

Codes and Standards | Jan 12, 2022

Regulator holding back climate-friendly, energy-saving equipment deployment, critics say

Heat pumps, solar power could be made more accessible for low-income communities in Massachusetts.

Codes and Standards | Jan 11, 2022

Cost hikes drive nearly one million renters out of homeownership qualification in 2021

Household income needed to pay a mortgage rose to $62,872 from $55,186.

Codes and Standards | Jan 10, 2022

New ratings services focus on climate risk for homeowners

Efficacy of models used in risk assessment varies.

Codes and Standards | Jan 6, 2022

Virginia contractors having a tough time finding diverse subs to meet state goals

Survey of primes may indicate similar issues at federal level.

Codes and Standards | Jan 5, 2022

Boston drops parking requirements for affordable housing

Measure expected to spur new projects.

Codes and Standards | Jan 4, 2022

Dept. of Energy Better Climate Challenge aims for 50% GHG emission reduction by 2030

Program offers technical assistance and peer-to-peer knowledge sharing.

Codes and Standards | Jan 4, 2022

Architects at New York firm take steps to unionize

Support for unionization reported at two other New York firms.

Codes and Standards | Jan 3, 2022

Biden’s executive order for a carbon-neutral government includes green materials mandate

As a driver of demand, federal procurement impact could ripple through the economy.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021