Many small New England cities have a legacy of prominent early 20th-century brick mills that were built when industries like textiles, shoes, clocks, and machine parts thrived in the region.
These solid industrial buildings were built to last. Even after decades of neglect, with the right plan, design, and execution, they can become highly desirable living places.
Such is the case with two Massachusetts mill-to-apartment adaptations in Fitchburg and Ludlow. Both were designed by The Architectural Team (TAT), Boston, and developed by WinnDevelopment, the largest manager of affordable housing in the U.S., with 100,000 units in 22 states. Both projects showcase endearing early 20th-century elements—brick walls, old-growth wood beams, and steel staircases—while adding modern treatments and amenities that 21st-century multifamily tenants expect.
Yarn Works: Revitalizing Fitchburg
Located in north-central Massachusetts, Fitchburg has struggled economically for decades, but a commuter rail line connecting to Boston’s North Station—a 70-minute ride—and relatively affordable real estate may signal that a revival could be within its grasp.
The $24.2 million renovation of Yarn Works, a 182,500-sf vintage textile mill, is a step in that direction. Listed on the National Register of Historic Places, the three-story property, once known as the Nockege River Mill Building, offers 57 market-rate and 39 affordable loft homes. The mill sits on the banks of the Nashua River, just a mile from the city center.
The riverside provides a delightful network of walking trails and park space, but it also carries the threat of flooding. The Yarn Works property is in a 100-year flood zone, according to recent FEMA flood hazard mapping. Mitigating this risk was one of the chief environmental concerns faced by the project team, said TAT Project Manager Scott Maenpaa.
Nearly 300 8x12-foot steel sash-and-wood windows were replaced. New, thermally broken aluminum frames with historically matched muntins and divided-lite windows were installed to meet NPS standards. Photo: © Andy Ryan
Originally, water from the river was allowed to flow through the mill’s earthen basement, a situation that had to be rectified. The team’s initial option—filling in the crawlspace—was rejected because the crawlspace was part of the flood storage capacity on site. “If we were to fill it in, we would have had to create equal water storage capacity on site to offset it,” said Maenpaa. The solution devised by TAT, structural engineer ODEH Engineers, and GC Colantonio Inc.: raise the first floor about 27 inches using a steel and concrete deck.
The generous height of each floor (about 15 feet) and the placement of the large windows averted a potential major problem. After the floor was raised, a two-inch gap remained below the windows. Had the floor been raised even a few inches higher, it would have required altering the window dimensions or configuration, something that would have complicated adherence to historic standards.
With historic tax credits at stake, the National Park Service and state and local preservation agencies scrutinized the design plans to ensure that all exterior elements hewed closely to the original design. The existing 12-foot-high, eight-foot-wide wood windows were replaced with aluminum-frame windows that were sturdy enough to hold up to expected wind loads under current code. The aluminum windows’ thermally broken frames and brick molds, divided lite configurations, and historically matched muntins conformed to the old look, allowing them to pass muster with the Park Service.
The quest for historic accuracy went as far as an analysis of the mortar composition—aggregate, consistency, and color—to match the original recipe as closely as possible. Skilled masons replicated the concrete formula during an extensive repointing of brick walls to match the color and texture of the new mortar to the original.
Interior brick walls had been painted numerous times over the years. “Our vision for the interior, though, was to showcase the natural look of red brick and old-growth southern pine beams and columns,” said Maenpaa. The brick was delicately sandblasted to remove the lead paint. “It had to be done so that the brick would not be pitted,” Maenpaa said.
The existing wood floors were in poor condition and could not be saved. While covering them with hardwood would have met aesthetic and cost goals, that option was rejected for acoustic reasons. The exposed masonry and large windows, while gorgeous to look at, had little sound-absorbing qualities. This created an echo chamber that would have been made worse by hardwood, Maenpaa said. Sound-dampening attributes were added to the flooring system to prevent noise from walking and other normal activities from creating a din.
The design also called for leaving exposed the existing wood decking ceiling rather than installing a drop ceiling. That meant that the flooring had to provide all of the sound dampening between floors. A sound-absorbing mat (in this case, Quiet Qurl, from Keene Building Products), coupled with a gypsum floor underlayment (Maxxon’s Gypcrete), provided an effective sound (and odor) barrier.
All 57 market-rate and 39 affordable loft homes at Yarn Works offer wood-plank ceilings and floors, exposed brick and original beams, and ceiling heights up to 15 feet. The $24.2 million renovation provided 29 one-bedroom, 58 two-bedroom, and nine three-bedroom apartments. Photo: © Gregg Shupe
Luxury vinyl plank flooring (from Turnaround Solutions) that mimics wood provided additional sound dampening and visually complemented the wood of the exposed ceiling deck. Hardwood flooring covers the common areas.
Many choices on interior finishes were set out by guidelines from the project’s funding agencies. These included high-grade laminate Formica 180fx countertops that mimic granite. In order to foster a clean indoor air environment, no carpeting was used. Low-VOC adhesives and no-VOC paints were specified. The cabinetry contained no urea formaldehyde products. Finishings were purposely kept minimal to reduce maintenance and expose the building’s architectural and structural elements.
The Massachusetts energy code requires a blower door test on each unit for buildings higher than three stories. To prevent air leakage, the units had to be compartmentalized from each other. (The layer of Gypcrete below the floor helped as well.) Exposed brick preserves the historic look and feel in the living room area walls. Bedrooms were insulated with closed-cell, high-density spray foam to enhance thermal efficiency. “About 40% of the walls in the building are insulated,” Maenpaa said.
The 3,000-sf lounge, which basks in the light of 17-foot-tall windows, has a community kitchen and a large-screen TV and seating area. (The kitchen countertop was crafted from Silestone, a quartz-like solid surface from Cosentino.) The dramatic space is defined by structural steel trusses, exposed brick walls, and 10-foot-high windows.
The Residences at Mill 10: Ludlow Rising
Just a short drive from Springfield, the Residences at Mill 10 are located in a 170-acre site along the Chicopee River, in Ludlow. The mill is one of more than 60 structures—including worker housing, schools, banks, and stores—built by the Ludlow Manufacturing and Sales Company, which over the course of 137 years produced jute yarns, rope, twine, and webbing. At its peak in the 1920s, the Ludlow complex occupied 1.2 million sf of mill and warehouse space.
The historic structure is a key element of the city’s Ludlow Mills Preservation and Redevelopment Master Plan. The four-story, 108,163-sf brick building, built in 1907, has much in common with the Yarn Works. It, too, is listed on the National Register of Historic Places; it, too, needed much of the same restoration work as the Fitchburg property—sandblasting and repointing the masonry, adding sound absorption to the flooring, and replacing more than 280 single-pane windows with double-pane aluminum historic replicas.
A significant difference in Ludlow was a large loading dock area in the rear of the first floor. Some of the first-floor units were expanded into this area, making them about twice the size of those in the floors above. “A lot of residents who moved in downsized from single-family homes, so these units offered extra space to make the move easier,” said Robert J. Verrier, FAIA, NCARB, TAT’s President, Managing Principal, and Founder. The bigger units have room for a formal dining area.
For the Residences at Mill 10 the renovation of the 108,000-sf former industrial facility required top-to-bottom structural work and restoration of the masonry façade. Exposed beams, high ceilings, and new historically matched windows characterize the interiors of the restored 1907-era mill, which is listed on the National Register of Historic Places. Photo: © Andy Ryan
The Ludlow property has a tenant lounge with a kitchen and TV viewing area on the first floor in the former loading dock area. Sawtooth skylights were preserved, allowing plenty of daylight to stream in. An outdoor patio provides additional seating off of the tenant lounge. There’s a fitness center and book nook, too.
The building’s main stair tower, a prominent feature at the main entrance, held up well over the years. “You could tell that it was the main point of egress for hundreds of mill workers,” Maenpaa said. “The treads had been worn down by as much as an inch.”
Planks salvaged from another century-old mill were used to replace the treads. The rails were cleaned and given a clear coat, leaving the refurbished staircase looking much as it had a hundred years ago.
A footbridge between the building and a neighboring structure was too low for modern fire equipment to pass under. But as part of the original structure it fell under historic review. “We had to bring a letter from the fire department to the National Park Service so that they would allow us to remove the bridge,” Maenpaa said.
Amenities at the Residences at Mill 10 include community spaces and common areas on each of its four floors, a reading nook, a fitnes and yoga center, and a cybercafé lounge. Photo: © Andy Ryan
Once the bridge was demolished, a new stair tower, consisting of floor-to-ceiling glass and Castle Gray–colored metal panels, was constructed to provide additional egress.
The 63 one-bedroom and 12 two-bedroom units at the Residences at Mill 10 leased up in a flash. “There’s no doubt that the desire for quality housing for seniors in this region is strong,” said Lawrence H. Curtis, WinnDevelopment’s President and Managing Partner.
DOUBLING DOWN ON BENEFITS
The Yarn Works and the Residences at Mill 10 show how to bring century-old, architecturally intriguing structures up to modern code. Both buildings underwent seismic upgrades. Structural engineer ODEH Engineers added long spans of structural steel on the interior corners of the buildings to act as seismic ties. From both an environmental and economic perspective, they have achieved the best possible solution: saving two valuable historic edifices from the wrecking ball.
And there’s more to come. WinnDevelopment, which has completed more than 20 mill renovations across New England, has secured the rights to create up to 136 market-rate apartments, as well as commercial, retail, and office space, in the adjacent 231,000-sf Mill 8, known as the Clock Tower building.
PROJECT TEAM | YARN WORKS
Client: WinnDevelopment; Architect: The Architectural Team; Structural engineer: ODEH Engineers; General contractor: Colantonio, Inc.
PROJECT TEAM | THE RESIDENCES AT MILL 10
Client: WinnDevelopment; Architect: The Architectural Team; General contractor: Dellbrook Construction
Residences at Mill 10. Photo: © Andy Ryan
Related Stories
Multifamily Housing | Sep 27, 2017
Pickleball, anyone?
Two-and-a-half million Americans are playing the game with the funny name.
Mixed-Use | Sep 25, 2017
One of L.A.’s most sought-after neighborhoods receives a new mixed-use development
The new development will feature 166 units and 9,000 sf of ground-floor retail.
Mixed-Use | Sep 21, 2017
Entire living rooms become balconies in a new Lower East Side mixed-used development
NanaWall panels add a unique dimension to condos at 60 Orchard Street in New York City.
Giants 400 | Sep 20, 2017
Bubble? What bubble?: Apartment and condo construction simply can't keep up with demand
Since the current multifamily boom took off in 2010, most activity has focused on large urban areas.
Multifamily Housing | Sep 20, 2017
New housing development rises from a historic textile mill’s ashes
Loft Five50 will add 137 housing units to Lawrence, Mass.
Multifamily Housing | Sep 19, 2017
Top 90 multifamily construction firms
Lendlease, Suffolk Construction, and Clark Group top BD+C’s ranking of the nation’s largest multifamily sector contractor and construction management firms, as reported in the 2017 Giants 300 Report.
Giants 400 | Sep 18, 2017
Top 40 multifamily engineering firms
WSP, AECOM, and Thronton Tomasetti top BD+C’s ranking of the nation’s largest multifamily sector engineering and EA firms, as reported in the 2017 Giants 300 Report.
Multifamily Housing | Sep 15, 2017
Hurricane Harvey damaged fewer apartments in greater Houston than estimated
As of Sept. 14, 166 properties reported damage to 8,956 units, about 1.4% of the total supply of apartments, according to ApartmentData.com.
Giants 400 | Sep 14, 2017
Top 95 multifamily architecture firms
Humphreys & Partners Architects, KTGY, and Perkins Eastman top BD+C’s ranking of the nation’s largest multifamily sector architecture and AE firms, as reported in the 2017 Giants 300 Report.
Multifamily Housing | Sep 5, 2017
Free WiFi, meeting rooms most popular business services amenities in multifamily developments
Complimentary, building-wide WiFi is more or less a given for marketing purposes in the multifamily arena.