A single mobile phone uses more energy per unit than a refrigerator, not so much in terms of recharging but in the data traffic and other actions the phone creates.
The Information and Communications Technology (ICT) sector consumes as much as 10% of the world’s electricity, a sizable portion of which goes toward operating data centers that are the spine of the Internet and the cloud.
Large data centers can use more electricity than a midsize town. However, much of that energy ends up being released as heat into the atmosphere, to the point where carbon emissions from data centers could exceed what the entire airline industry spews annually within the next five years.
Consequently, as data centers expand, greater emphasis is being placed on controlling their impact on the environment. Apple claims that all of its data centers are powered by 100% renewable energy, including new data centers in Denmark and Ireland that will be completed in 2017. Apple has also made an $850 million investment in a solar farm in California to power its new campus in Silicon Valley, all its California offices and data centers, and its data center in Newark, Calif.
In Falun, Sweden, the municipality owned Falu Energi & Vatten is collaborating with Schneider Electric and EcoDC AB, which specializes in designing and building climate-smart data centers, to build what this team is calling the world’s first climate-positive data center.
The location of this three-building, 250,000-sf EcoDataCenter is relevant. Falun is one of the greenest towns on the planet. Ninety-five percent of houses with district heat in Falun (about half of all homes in the municipality) are provided with heat from a cogeneration plant that recycles forestry waste to produce electricity and warm water.
The town also has one of Sweden’s largest solar panel arrays. More than half of Falun’s energy needs are provided by hydro, wind, and cogeneration plants, with the rest coming from renewable sources such as solar and secondary biofuels.
Consequently, 100% of the energy that the EcoDataCenter would use will come from renewable sources. The 18-megawatt data center will be connected to Falun’s energy grid, and excess heat from its servers and equipment will warm buildings in the town’s district heating system. During the summer, excess steam from a local electricity plant will run machines that cool the data center.
No electricity will be required to increase the return water temperature from the data center. Heat from the data center replaces existing marginal heat production with high CO2 emissions. This CO2 replacement will exceed total CO2 emissions from the data center during a year.
EcoDataCenter’s first building should be completed in the first quarter of 2016. When fully operational, EcoDataCenter should attain the highest levels of availability and security classification. (It is expected to be Sweden’s first to achieve a Tier IV certification from Uptime Institute.)
The data center is projected to operate with a power usage effectiveness (PUE)—useful IT kilowatts divided by totally used kilowatts—of less than 1.15.
Related Stories
Industrial Facilities | Jul 24, 2024
Industrial construction slows, but demand remains strong
California and Arizona remain the most sought-after markets for development and operations, says CommercialEdge’s latest report.
Great Solutions | Jul 23, 2024
41 Great Solutions for architects, engineers, and contractors
AI ChatBots, ambient computing, floating MRIs, low-carbon cement, sunshine on demand, next-generation top-down construction. These and 35 other innovations make up our 2024 Great Solutions Report, which highlights fresh ideas and innovations from leading architecture, engineering, and construction firms.
Industrial Facilities | Jun 8, 2024
8 ways to cool a factory
Whichever way you look at it—from a workplace wellness point of view or from a competing for talent angle—there are good reasons to explore options for climate control in the factory workplace.
Building Tech | May 21, 2024
In a world first, load-bearing concrete walls built with a 3D printer
A Germany-based construction engineering company says it has constructed the world’s first load-bearing concrete walls built with a 3D printer. Züblin built a new warehouse from a single 3D print for Strabag Baumaschinentechnik International in Stuttgart, Germany using a Putzmeister 3D printer.
Industrial Facilities | May 9, 2024
Another new industrial facility breaks ground in hottest market for this sector
The Brickyards on Ellsworth in Mesa, Ariz., will eventually have eight buildings.
Laboratories | Apr 12, 2024
Life science construction completions will peak this year, then drop off substantially
There will be a record amount of construction completions in the U.S. life science market in 2024, followed by a dramatic drop in 2025, according to CBRE. In 2024, 21.3 million sf of life science space will be completed in the 13 largest U.S. markets. That’s up from 13.9 million sf last year and 5.6 million sf in 2022.
Industrial Facilities | Apr 9, 2024
Confessions of a cold storage architect
Designing energy-efficient cold storage facilities that keep food safe and look beautiful takes special knowledge.
Data Centers | Feb 28, 2024
What’s next for data center design in 2024
Nuclear power, direct-to-chip liquid cooling, and data centers as learning destinations are among the emerging design trends in the data center sector, according to Scott Hays, Sector Leader, Sustainable Design, with HED.
Designers | Feb 23, 2024
Coverings releases top 2024 tile trends
In celebration of National Tile Day, Coverings, North America's leading tile and stone exhibition, has announced the top 10 tile trends for 2024.
MFPRO+ News | Feb 15, 2024
UL Solutions launches indoor environmental quality verification designation for building construction projects
UL Solutions recently launched UL Verified Healthy Building Mark for New Construction, an indoor environmental quality verification designation for building construction projects.