The Metal Construction Association (MCA) has released a white paper focused on Metal Composite Material (MCM) labeling.
The document, Labeling: Who Cares and Why, addresses the need to make sure the MCM product or system has been tested by an approved agency and labeled according to IBC code. MCM is formed by joining two thin skins of metal—typically aluminum but sometimes zinc, copper, stainless steel, or titanium—to a polyethylene or fire-retardant core and then bonded under a precise temperature, pressure, and tension.
This makes MCM lighter and more versatile and flexible than a solid metal of similar thickness—qualities that have helped transform modern architecture, according to a MCA news release. “Anyone searching the internet can find dozens of products claiming to be MCM,” says Karl Hielscher, MCA's Executive Director. “MCM is used in many applications requiring different performance capabilities. Clear, consistent labeling is important to help assure the right materials are chosen and used to meet design requirements.”
The document is available as a free download at: https://www.metalconstruction.
Related Stories
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
Codes and Standards | Feb 17, 2017
New energy design guide for metal building systems now available
The second edition incorporates more recent IECC and ASHRAE standards.