flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

White paper examines how to reduce pathogen transmission in ventilation

Codes and Standards

White paper examines how to reduce pathogen transmission in ventilation

Pressure barriers and airflow distribution can be effective in existing buildings.


By Peter Fabris, Contributing Editor | May 12, 2021

Courtesy Pixabay

Experts examined reduced pathogen transmission using a building’s original mechanical design, original installation, design intent, and proper maintenance in a new white paper.

Return Ductwork Requirement for Airborne Pathogens Through the Airstream, discusses two approaches: pressure barriers and airflow distribution. The paper looks at the pros and cons of using the cavity above a finished ceiling as a return air plenum combined with supply air to the air handler as a proper ventilation technique.

Considerations include how ventilation systems affect the health and well-being of building occupants. A ceiling plenum provides some fan-specific energy efficiency and reduced material and labor costs, but it could put occupants and workers at risk and result in unintended energy losses. An open ceiling plenum is difficult to clean and disinfect, while ductwork can be easily cleaned.

A ducted return system allows a testing, adjusting, and balancing professional to adjust room pressures and airflow patterns to accommodate a change in use or mitigate pathogen transmission during a pandemic. Authors of the white paper include members of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Technical Committee 5.2 Duct Design.

Related Stories

Codes and Standards | Jan 25, 2016

Dept. of Energy releases decision guides for plug and process loads

Plug and process loads consume about 30% of the primary energy in U.S. commercial buildings today.

Codes and Standards | Jan 22, 2016

ConsensusDocs releases new multi-party IPD agreement and joining agreement

The documents serve as a comprehensive revision of previous IPD agreement

Codes and Standards | Jan 22, 2016

State Savings Calculator analyzes savings associated with energy codes

The calculator breaks down the cost-effectiveness of energy codes on a state-by-state basis.

Codes and Standards | Jan 22, 2016

Metal Roofing Seaming Guide published by Metal Construction Association

The free document is specifically tailored for metal roof installation.

Codes and Standards | Jan 22, 2016

Treasury Dept. will start crackdown on illicit money in luxury real estate

The move is expected to impact high-end condo development.

Resiliency | Jan 13, 2016

LEED credits on resiliency expected to influence future of building design

Post-disaster survivability is a key goal.

Codes and Standards | Jan 12, 2016

Batteries are the next step in raising sustainability standards

Battery technology will reduce electricity costs and promote a more stable, flexible grid.

Codes and Standards | Jan 4, 2016

Denver broadens its use of design reviews as construction booms

Support strong, but some wary of giving more say to review boards.  

Codes and Standards | Dec 23, 2015

International Code Council approves updates based on NIST study of Joplin, Mo. tornado

Applies to schools and other high occupancy buildings.

Codes and Standards | Dec 21, 2015

Changing building codes to protect against mass shootings at odds with other safety measures

Fire and other emergencies require getting people out quickly, not locking down sections.  

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021