The Window and Door Manufacturers Association (WDMA) and the American Architectural Manufacturers Association (AAMA) have jointly released the updated 2011/2012 Study of the U.S. Market for Windows, Doors and Skylights. This report delivers accurate and timely information on window, door, skylight, and curtain wall market trends and product relationships for both residential and commercial construction. Historic data for 2006 through 2011 and forecast data for 2012 through 2015 are also included in the report. Forecasts are based on projections of construction activity as of March 2012.
According to the study's data, the demand for prime windows continued to remain slow in 2011, following housing activity in general, after falling from peak volumes in 2006. The demand for windows in new housing decreased by 2% in 2011 though remains slightly ahead of 2009 levels. Demand in 2012 is expected to increase further as the housing recovery begins to gain momentum. Meanwhile, remodeling and replacement windows fell by nearly 12% versus 2010. In total, the residential window market decreased by 9%.
Residential skylights experienced an increase of 2% from 2010 to 2011. The increase was driven heavily by the continued strength of remodeling and replacement activity, which now represents more than 80% of the residential skylight market. For 2012, the market is expected to grow 6% overall. Forecasts indicate continued growth through 2015.
Little change in the segmentation for interior door material types is expected over the next 5 years. However, significant volume is expected to return to the entry and interior door market as new construction rebounds. Further, nonresidential construction declined slightly in 2011, tempering growth in the nonresidential entry and interior door categories.
Additional and more detailed information on the residential and commercial fenestration markets is contained in the 2011/2012 WDMA/AAMA U.S. Market Studies, which includes all of the items listed below.
- WDMA/AAMA U.S. Industry Statistical Review and Forecast summarizes residential, non-residential and remodeling trends from government and industry sources.
- WDMA/AAMA U.S. Industry Channel Distribution Report profiles the residential and non-residential market for windows and doors as it flows through the identified distribution channels.
- WDMA/AAMA U.S. Industry Market Size Report quantifies residential and non-residential market volumes, both historic and projected.
- WDMA/AAMA U.S. Industry Regional Statistical Review and Forecasts detail information for 11 individual regions.
The 2011/2012 WDMA/AAMA Study of the U.S. Market for Windows, Doors and Skylights, as well as the other reports listed above, are available for purchase online at the WDMA Bookstore. +
Related Stories
| May 5, 2014
Tragic wired glass injury makes headlines yet again
In the story, a high school student pushed open a hallway door glazed with wired glass. His arm not only broke the glass, but penetrated it, causing severe injuries. SPONSORED CONTENT
| May 3, 2014
Health system capital planning for the future: The benefits of master plan portfolio analysis and ambulatory market modeling
Money continues to be scarce, yet U.S. health systems need to invest and re-invest in their physical future. Healthcare facilities planning experts from CBRE Healthcare outline tools and strategies for identifying where to best allocate precious resources.
| May 3, 2014
4 easy steps to being a great project manager
Managing a team of people, especially creative people, is a task that not everyone is up for. Keeping your team on the same page while maintaining a schedule and budget that can keep your corporation happy will take confidence and bountiful people skills. Here are some tips for effectively managing a project. SPONSORED CONTENT
Sponsored | | May 3, 2014
Fire-rated glass floor system captures light in science and engineering infill
In implementing Northwestern University’s Engineering Life Sciences infill design, Flad Architects faced the challenge of ensuring adequate, balanced light given the adjacent, existing building wings. To allow for light penetration from the fifth floor to the ground floor, the design team desired a large, central atrium. One potential setback with drawing light through the atrium was meeting fire and life safety codes.
| May 2, 2014
World's largest outdoor chandelier tops reworked streetscape for Cleveland's PlayhouseSquare
Streetscape project includes monumental gateway portals, LED signage, and a new plaza, fire pit, sidewalk café, and alfresco dining area.
| May 2, 2014
Norwegian modular project set to be world's tallest timber-frame apartment building [slideshow]
A 14-story luxury apartment block in central Bergen, Norway, will be the world's tallest timber-framed multifamily project, at 49 meters (160 feet).
| May 2, 2014
Top 10 countries for LEED buildings outside the U.S.
The list of the top 10 countries for LEED reflects the global adaptability of the world’s most widely used and recognized system guiding the design, construction, operations and maintenance of green buildings.
| May 1, 2014
First look: Cal State San Marcos's posh student union complex
The new 89,000-sf University Student Union at CSUSM features a massive, open-air amphitheater, student activity center with a game lounge, rooftop garden and patio, and ballroom space.
| May 1, 2014
Super BIM: 7 award-winning BIM/VDC-driven projects
Thom Mayne's Perot Museum of Nature and Science and Anaheim's new intermodal center are among the 2014 AIA TAP BIM Award winners.
| May 1, 2014
Tight on space for multifamily? Check out this modular kitchen tower
The Clei Ecooking kitchen, recently rolled out at Milan's Salone de Mobile furniture fair, squeezes multiple appliances into a tiny footprint.
