flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Washington state building codes to protect structures from wildfire provoke controversy

Codes and Standards

Washington state building codes to protect structures from wildfire provoke controversy

Critics concerned over cost and possibility of too many trees being cut down


By Peter Fabris, Contributing Editor | November 10, 2023
Image by Chil Vera from Pixabay
Image by Chil Vera from Pixabay

New building codes in Washington state intended to protect structures from wildfires are provoking backlash from builders, cities, and environmentalists.

Critics charge that the rules that are scheduled to take effect March 15 are confusing, will increase housing costs, and could cause too many trees to be cut down. The law’s guidelines apply to new construction and remodels, and require roofs, siding, decks, doors, windows, and other parts of homes to be made from fire-resistant material.

The law also requires “defensible space” between a structure and the surrounding vegetation. Defensible space ranges from 30 to 100 feet, depending on factors including building materials, water availability for firefighting, and road access near the structure. Trees planted in the defensible zone must be at least 10 feet apart and 10 feet away from structures.

Opponents say that the map that guides which areas are subject to the new rules includes too many places that are actually low risk. A building industry group estimated the new rules would add at least $4,300 to the cost of a home.

Related Stories

| Feb 6, 2013

BOMA favors voluntary energy benchmarking and disclosure, opposes mandates

The Building Owners and Managers Association (BOMA) International announced support for voluntary energy benchmarking, but said it opposes mandates for benchmarking, disclosure, and labeling that many states and municipalities are implementing.

| Feb 6, 2013

Lumber Standard Committee approves new Southern Pine design value changes

The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.

| Feb 6, 2013

CEIR seeks public input on draft of PV racking and attachment document

The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.

| Feb 6, 2013

Insurance Institute demonstration shows advantages of following wind resistance standards

A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.

| Jan 31, 2013

Proposed ASHRAE legionellosis prevention standard open for third public comment

Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.

| Jan 31, 2013

More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert

The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.

| Jan 31, 2013

California Building Standards Commission adopts 2013 code update

The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.

| Jan 25, 2013

D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives

The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.

| Jan 25, 2013

Energy modeling needed to overcome ‘plug load problem’ to meet high green standards

Plug loads illustrate how much end-users impact overall building energy use.

| Jan 25, 2013

ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2

A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021