Some buildings performed well during Hurricane Dorian in the Bahamas, likely saving lives, according to a preliminary virtual reconnaissance report by the University of Florida’s Engineering School of Sustainable Infrastructure and Environment.
Buildings such as the Marsh Harbour Healthcare Center served as storm shelters and performed well. Marsh Harbour was back to functioning immediately after the hurricane passed through the islands.
Hurricane Dorian raised the need for more study on impacts of slow-progression hurricanes and highlighted the need to reexamine disaster risk and preparedness for small island nations, the report says. At least 76,000 people were impacted by Dorian on the Bahamas, with more than 50 deaths and many still missing.
The U.S. Agency for International Development (USAID) reported that satellite-based damage assessments have counted about 1,100 destroyed buildings and nearly 2,300 damaged buildings on Greater Abaco, one of the hardest-hit islands. Building destruction on some islands ranged from 25% to 75%.
Related Stories
Codes and Standards | Nov 28, 2017
Nail-Laminated timber Canadian design and construction guide released
Includes practical strategies and guidance with lessons from real-life projects.
Codes and Standards | Nov 27, 2017
New standard to monitor building sealing performance
Increased understanding of how materials act when stretched and compressed is the goal.
Codes and Standards | Nov 27, 2017
Denver voters approve green roof mandate
Buildings of 25,000 sf or larger required to install vegetative roof or PVs.
Codes and Standards | Nov 21, 2017
USGBC adopts ‘RELi’ resilient building and design standard
The standard prescribes methods for designing more resilient buildings and communities.
Codes and Standards | Nov 21, 2017
Updated material transparency web site and hazardous building materials list unveiled
Improved versions of tools aimed at use of healthier construction supplies.
Codes and Standards | Nov 16, 2017
White roofing isn’t always the best choice
Adverse effects include heat reflection onto nearby walls.
Codes and Standards | Nov 15, 2017
U.S. finalizes tariffs on Canadian softwood lumber
The duties would add 20% or more to cost if trade negotiators can’t find common ground.
Codes and Standards | Nov 15, 2017
NBI stretch code a tool for accelerating efficiency standards
It provides a strategy to leapfrog minimum code requirements.
Codes and Standards | Nov 14, 2017
California bill would require purchase of low-carbon construction products
Contractors would have to source products based on greenhouse gas impact, not price, on state projects.
Codes and Standards | Nov 13, 2017
New AIA contract document for facility support services released
Updated form intended to be used with owner-architect agreements.
