The U.S. Green Building Council (USGBC) announced its LEED Positive vision statement and LEED development roadmap that will “lay the foundation for a future of LEED that is regenerative.”
LEED Positive will encourage development that allows buildings to become a vehicle for environmental restoration and repair, according to a USGBC news release. The vision consists of several parts that will guide development of the LEED rating system, including:
· Proposed LEED Positive targets for energy and carbon reduction that will require new construction to go further and push existing buildings with high energy usage to substantially increase their efficiency efforts
· Define LEED Positive targets for other LEED credit categories that make up the holistic LEED rating system
· Continue investment in LEED v4.1 to accelerate the implementation and adoption of LEED for both new and existing buildings
· Support category level performance certificates through the Arc platform to provide existing buildings with a pathway to LEED certification
“LEED must evolve qualitatively and quantitatively,” said Mahesh Ramanujam, president and CEO, USGBC. “Qualitatively, it must transition from strategies that reduce the harm done by buildings to strategies that cause no harm and are regenerative by design, ensuring our buildings are actually giving back more than they take. And quantitatively it will need to accelerate and increase its impact ten to a hundred-fold by leveraging our Arc performance platform.”
Related Stories
| Jan 16, 2013
New standard for geothermal heat pump systems piping to be included in 2015 International Mechanical Code
NSF International, an independent global organization that writes standards, and tests and certifies products, has published the first in a series of American National Standards for Ground-Source Geothermal Piping Systems – NSF/ANSI 358-1.
| Jan 16, 2013
ANSI passes new safety standards for reinforcing steel and post-tensioning
The ANSI A10 Accredited Standards Committee for Construction and Demolition Operations recently approved amendments to the ANSI A10.9 Concrete and Masonry Standard.
| Jan 8, 2013
Congress passes Drywall Safety Act
Congress recently passed the Drywall Safety Act; President Barack Obama is expected to sign it soon.
| Jan 8, 2013
Building-integrated PVs could help boost green standards over the next few years
A developing technology could begin to have an impact on sustainable standards over the next few years.
| Jan 8, 2013
Revamp of codes among nine low tech steps to raise community resiliency
Updating of local zoning and building codes is one of nine low-tech steps that can boost sustainability and storm resiliency, according to this article.
| Jan 8, 2013
Group releases safety and building codes from 24 countries
Public.Resource.Org released 10,062 public safety documents including building codes covering 24 countries and 6 regions.
| Jan 8, 2013
Montana developing high-performance building standards for state projects
The Montana Department of Administration is developing a single building standard for all state facilities, and hopes to have a plan in place this spring.
| Jan 4, 2013
AGC economist says "fiscal cliff" deal will give construction a boost
The deal in Congress to avoid going over the so-called fiscal cliff "should encourage many businesses to go ahead with projects they have held in reserve," said Ken Simonson, chief economist of the Associated General Contractors of America.
| Jan 4, 2013
California standards on furnishings, insulation to be revised
California is revising the state’s standards on interior furniture and insulation to maintain or improve fire safety while reducing or eliminating the use of toxic chemicals.
| Jan 4, 2013
Tilt-Up Concrete Association releases new temporary wind bracing guidelines
The Tilt-Up Concrete Association has released revised guidelines on Temporary Wind Bracing of Tilt-Up Concrete Panels During Construction.
