flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

U.S. House scuttles EPA plan to expand definition of waters in Clean Water Act

Codes and Standards

U.S. House scuttles EPA plan to expand definition of waters in Clean Water Act

Construction industry officials said the rule would hamper developers, cost jobs.


By Peter Fabris, Contributing Editor | May 22, 2015
U.S. House scuttles EPA plan to expand definition of waters in Clean Water Act

Builders, farmers, and others had objected to the rule, saying the proposed definition would force landowners to get federal permits before they could work around them. Image: Pixabay/falco

The U.S. House of Representatives voted to direct the Environmental Protection Agency to eliminate a proposed rule that would expand the definition of waters that are subject to the Clean Water Act.

Builders, farmers, and others had objected to the rule, saying the proposed definition, which would include small bodies of water such as ponds, creeks, and ditches on private property, would force landowners to get federal permits before they could work around them.

Construction industry advocates contend that the proposed rule was too great an expansion of the kinds of water regulated by the government, and would stop building projects and cost jobs.

“The poorly crafted and overreaching Waters of the U.S. rule adds a great deal of ambiguity and uncertainty for contractors, and we hope the Obama administration sees today’s action as a bipartisan referendum against this bad rule,” said Geoff Burr, vice president of government affairs for Associated Builders and Contractors.

The House action means the EPA and the Army Corps of Engineers will have to start from scratch in their efforts to update the Clean Water Act. 

Related Stories

Codes and Standards | Jul 6, 2015

First valuation advisory for green and high performance property adopted

The document provides voluntary guidance to appraisers on the background and competency necessary to credibly value green buildings.

Codes and Standards | Jun 24, 2015

Maryland’s Prince George County turns to P3s to build green infrastructure

Over the next 10 years, the county must convert 15,000 acres of watertight surfaces—almost 5% of the county's total area—into surfaces that absorb or treat rainwater. 

Codes and Standards | Jun 24, 2015

Philadelphia considers more incentives for green building

Developers could be allowed additional height, floor area on projects that meet benchmarks.

Codes and Standards | Jun 24, 2015

LEED building at Duke University may be retrofitted to prevent bird deaths

More birds die from colliding with buildings at Duke than on any other campus in a 45-school survey conducted by Augustana College. Duke is located along the Atlantic Flyway, a bird migration route. 

Codes and Standards | Jun 24, 2015

Balcony collapse in Berkeley, Calif., prompts an examination of codes

Dry rot and too much weight appear to be the causes of a fatal accident at an eight-year-old building in Berkeley, Calif. 

Codes and Standards | Jun 18, 2015

Guides to wood construction in high wind areas updated

The guides establish prescriptive, wind-resistive structural requirements for wood-frame buildings of different sizes and shapes.

Codes and Standards | Jun 18, 2015

New document addresses school safety and security

In an effort to balance security and fire safety features within codes, standards and planning, NFPA hosted a two-day workshop, “School Safety, Codes and Security”, last December. The findings are now available in an NFPA report.

Codes and Standards | Jun 18, 2015

Two myths regarding NFPA 101 Life Safety Code debunked

NFPA life safety engineer Ron Coté settles the debate over second egress doors and exit signs.

Codes and Standards | Jun 18, 2015

How to prevent corrosion in sprinkler system piping

The technical committees responsible for NFPA 13, Installation of Sprinkler Systems, have been looking at ways to eliminate or reduce corrosion in sprinkler systems for several revision cycles.

Codes and Standards | Jun 11, 2015

Steel Framing Alliance updates ‘Thermal Design and Code Compliance for Cold-Formed Steel Walls’ design guide

Includes results of new tests and addresses IECC and ASHRAE compliance paths.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021