As the U.S. economy sputters back to life, contractors wait for the green light on projects [2013 Giants 300 Report]

The narrative of the U.S. nonresidential construction industry of the last 12 months has been one of growth, but in all the wrong places. While five of the 16 major construction sectors grew last year—some significantly—those that experienced the largest gains represent a relatively small portion of the overall market. On the flip side, several sectors that saw the steepest decline last year happen to make up a fairly sizable portion of nonresidential construction.

Lodging, for example, has been on a tear in recent months, growing 16.6% between April 2012 and April 2013 in order to meet the increase in business and leisure travel. Double-digit YOY growth is good news any way you look at it, but the fact that lodging represents just 2% of the overall market means it will do little to move the needle. Same goes for the transportation (11.4% growth), commercial (1.9%), and office (1.6%) sectors: their growth is muted by their relatively small size.

On the other hand, major sectors like education, power, and highway and street all saw a drop in construction spending last year.

“As a result, when you look at the aggregate, we’re not seeing much of a recovery in nonresidential construction spending,” said Anirban Basu, Chief Economist with the Associated Builders and Contractors (ABC) and Chairman and CEO with Sage Policy Group, during his recent mid-year construction forecast.

TOP CONTRACTORS

2012 Total Revenue ($)

1 Turner Corporation, The $9,084,870,000

2 Fluor $4,268,290,500

3 Skanska USA $4,076,092,814

4 PCL Construction Enterprises $3,981,419,164

5 Whiting-Turner Contracting Co., The $3,699,782,771

6 Clark Group $3,563,246,719

7 Balfour Beatty $3,453,790,847

8 Gilbane $3,083,529,000

9 Structure Tone $2,947,433,000

10 McCarthy Holdings $2,546,000,000

SEE FULL LIST

TOP CONSTRUCTION MANAGEMENT FIRMS

2012 Total Revenue ($)

1 URS Corp. $297,282,076

2 STV $227,390,000

3 JE Dunn Construction $207,304,154

4 Barton Malow $182,697,897

5 Parsons Brinckerhoff $179,900,000

6 S. M. Wilson & Co. $168,859,740

7 Turner Corporation, The $157,920,000

8 Jones Lang LaSalle $140,020,000

9 LPCiminelli $139,198,329

10 Structure Tone $132,000,000

SEE FULL LIST

“What we’re seeing is a real dichotomy in the market. There is evidence of private-sector improvement in the data, but we also see strong evidence of constrained public-sector budgets affecting major markets like education and public safety,” he says.

Basu predicted a 5-6% bump in total nonresidential construction spending in 2013, with the bulk of the gains coming from the commercial and industrial sectors. “It’s not terrible news, but given how far nonresidential activity had fallen, this is a really slow rebound at best,” he added.

Adding to the frustration of AEC firms, said Basu, is the reluctance of many building owners and developers to pull the trigger on new construction and renovation projects. He said there are enough positive indictors in the U.S. economy to justify greenlighting projects: 2% GDP growth this year, even with the sequestration measures taking hold; falling unemployment numbers; positive consumer spending and household wealth figures; an upturn in housing construction; near-historic-low interest rates; shrinking office and industrial vacancy rates; healthy hotel occupancy rates; and budget surpluses in some states.

“All of this suggests we should be in the midst of a fairly robust nonresidential construction recovery, but it’s simply not taking place,” said Basu, offering some possible explanations: uncertainty related to the Affordable Care Act; an investor community that remains largely skittish; slow population growth; troubled state and local government budgets; public pension concerns; high unemployment rates; European Union budget woes; and the overall rise in healthcare costs.

This mixed bag of positive and negative economic data translates into a gradual recovery for the nonresidential construction market.

Read BD+C's full Giants 300 Report

Glass is heat-treated for two reasons: the first is to increase its strength to resist external stresses such as wind and snow loads, or thermal loads caused by the sun’s energy. The second is to temper glass so that it meets safety glazing requirements defined by applicable codes or federal standards.

| Feb 27, 2014

Metal Construction Association introduces two Environmental Product Declarations

Two Environmental Product Declarations (EPD), one for Metal Composite Material Panels and one for Roll Formed Steel Panels for Roofs and Walls, are now available free of charge from the Metal Construction Association (MCA) on its website.

| Feb 27, 2014

Bluebeam Software launches Revu 12 for better field-ready document management and project collaboration

The latest version of the company’s flagship solution better enables users in document-intensive industries to digitally collaborate on project documents and more easily connect the office to the field.

PocketCake's VRSCA (for Virtual Reality Simulation Converter Assembly) is three

| Feb 27, 2014

PocketCake lunches CPU designed for virtual reality simulations

The company's Virtual Reality Simulation Converter Assembly is three times more powerful than the average high-performance computer and allows for up to eight people to experience a virtual reality simulation at the same time.

Photos courtesy Blackney Hayes Architects

| Feb 26, 2014

Adaptive reuse project brings school into historic paper mill

The project features nontraditional classrooms for collaborative learning, an arts and music wing, and a technologically sophisticated global resource center.

| Feb 26, 2014

Use this app to streamline safety inspections

Using the iAuditor app, one of our Skanska teams developed electronic reports that make safety inspections more efficient, and that make it easier to address any issues emerging from them.