flexiblefullpage

HORIZONTV FEATURING BD+C: WATCH EPISODES ON DEMAND AT HORIZONTV

Menu View Full Menu
Subscribe Here
billboard
interstitial1
catfish1
Currently Reading

U.S. construction companies not embracing technology: KPMG survey

U.S. construction companies not embracing technology: KPMG survey

Contractors fall short on adopting robotics, drones, RFID technology, and mobile technology.

September 16, 2016
Continue Reading
NEW YORK, Sept. 14, 2016 – U.S. construction companies are not embracing technological advancements, such as drone aircrafts, robotics, RFID equipment and materials tracking, and data analytics, according to KPMG International’s Global Construction Survey 2016, “Building a technology advantage (http://bit.ly/2d0zNSb).
 
The KPMG survey found that nearly half of organizations use multiple software platforms that are manually monitored, rather than a single, fully integrated project management information aystem (PMIS). When it comes to mobile technology and platforms, while most use remote monitoring on projects, 19% do not use mobile technology at all. Among those who do utilize mobile technology for projects, nearly 40% do not have them linked to an integrated system or broader enterprise-wide project management system.
 
“The survey responses reflect the industry’s innate conservatism towards technologies, with most firms content to follow rather than lead,” says Geno Armstrong, International Sector Leader, Engineering & Construction, KPMG in the U.S. “Many lack a clear technology strategy, and either adopt it in a piecemeal fashion, or not at all. The rapidly evolving infrastructure challenges of the next decade demands that both owners and engineering and construction firms embrace technology more strategically and at a far more rapid pace than in the past.”
 
In the KPMG study, two-thirds of respondents (67%) said they could not push one button on their desktop to obtain fully integrated real-time data on a project. Seventy percent do not use robotic or automated technology; most have no plans to use it in the future. In addition to traditional cost and schedule analytics, 65% do not use data analytics for any other aspects of their organizations’ projects.
 
“Integrated, real-time project reporting is still a myth, rather than a reality for most,” said Armstrong. “That’s largely because firms tend to use multiple software platforms that are manually monitored and disconnected, which severely compromises their effectiveness.”
 

A solid majority of respondents (61%) said their companies use building information modeling on projects.

On the bright side, 36% of construction executives surveyed said they felt construction has emerged from the recession and is starting to grow. Nearly a fourth (24%) said that things are looking up for all participants. Another 27% indicated that discrete segments are growing fast. Only 13% said they are seeing market declines or no growth in the past year.

 
Armstrong feels that embracing technology and innovation is a sure way to improve results. “Projects are becoming bigger, bolder and more complex – and with complexity comes risk,” he said. “Innovations like remote monitoring, automation and visualization have enormous potential to speed up project progress, improve accuracy and safety.”
 
About the survey
Building a technology advantage – Global Construction Survey 2016 highlights the views of over 200 senior executives from major project owners and engineering and construction companies – over 50 of which are in the U.S. The report looks at how the industry is embracing a range of technologies including data and analytics, robotics, drones, remote monitoring and visualization. The survey, now in its 10th year, includes both private companies and government agencies, with project owners from many industries including energy and natural resources, technology and healthcare. 

Tags

Related Stories

Sponsored | | Nov 19, 2014

Long-life coatings vs. long-life screws

Are you concerned with the long-life protection of your metal building project? SPONSORED CONTENT

Sponsored | | Nov 19, 2014

Build green while you work green

Leading general contractors, including Skanska USA and Turner Construction, are implementing sustainable modular jobsite offices throughout the country. SPONSORED CONTENT

Sponsored | | Nov 19, 2014

Fire resistive, blast-resistant glazing: Where security, safety, and transparency converge

Security, safety and transparency don’t have to be mutually exclusive thanks to new glazing technology designed to support blast and fire-resistant secure buildings. SPONSORED CONTENT

Renderings courtesy Damian Rogers Architecture, Arup, Squint/Opera
| Nov 19, 2014

Must see: Arup, Damian Rogers propose urban surf park in Melbourne

The surfing pool would offer 98-foot-wide waves that would run the length of the 500-foot-long enclave.

Photo: Dave_7 via Wikimedia Commons
| Nov 18, 2014

Architecture Billings Index dips in October, still shows positive outlook design services

Headed by the continued strength in the multifamily residential market and the emerging growth for institutional projects, demand for design services continues to be healthy, as exhibited in the latest Architecture Billings Index.

An example of Aons Construction Risk Map, which the portal updates regularly to
| Nov 18, 2014

New tool helps developers, contractors identify geographic risk for construction

The new interactive tool from Aon Risk Solutions provides real-time updates pertaining to the risk climate of municipalities across the U.S.

| Nov 18, 2014

Grimshaw releases newest designs for world’s largest airport

The airport is expected to serve 90 million passengers a year on the opening of the first phase, and more than 150 million annually after project completion in 2018. 

| Nov 17, 2014

Nearly two years after Sandy Hook, the bloodshed continues

It’s been almost two years since 20 first-graders were shot and killed at Sandy Hook Elementary School in Newtown, Conn., but these incidents, both planned and random, keep occurring, writes BD+C's Robert Cassidy.

| Nov 17, 2014

Hospitality at the workplace: 5 ways hotels are transforming the office

During the past five years, the worlds of hospitality and corporate real estate have undergone an incredible transformation. The traditional approach toward real estate asset management has shifted to a focus on offerings that accommodate mobility, changing demographics, and technology, writes HOK's Eva Garza.

| Nov 17, 2014

Developments in 3D printing can assist architecture in the smallest details

Researchers at the Department of Energy’s Oak Ridge National Laboratory (ORNL) have developed a way for 3D printed metals to be produced with an unprecedented degree of precision.

boombox1
boombox2

Top Articles

native1

More In Category

Great Solutions

41 Great Solutions for architects, engineers, and contractors

AI ChatBots, ambient computing, floating MRIs, low-carbon cement, sunshine on demand, next-generation top-down construction. These and 35 other innovations make up our 2024 Great Solutions Report, which highlights fresh ideas and innovations from leading architecture, engineering, and construction firms.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021