flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Updated standard for liquid applied flashing for exterior wall openings released

Codes and Standards

Updated standard for liquid applied flashing for exterior wall openings released

AAMA document establishes minimum performance requirements.


By Peter Fabris, Contributing Editor | June 27, 2019

Courtesy Pixabay

The American Architectural Manufacturers Association (AAMA) has released an updated specification establishing minimum performance requirements for liquid-applied flashing used to provide water-resistive seals around exterior wall openings in buildings.

The standard applies to fenestration products, such as windows and doors, as well as other through-wall penetrations. AAMA 714-19, “Voluntary Specification for Liquid Applied Flashing Used to Create a Water-Resistive Seal around Exterior Wall Openings in Buildings,” was last updated in 2015.

“Liquid-applied flashing products are seeing increasing application for sealing building interfaces, including flashing around windows and doors,” said Jim Katsaros (DuPont Building Performance Solutions), chair of the AAMA Flashing Committee, in an AAMA news release. “These products offer many performance advantages, including outstanding adhesion to a wide variety of substrates, ultimate conformability for complex geometries and, in many cases, vapor permeable water-resistant seals.”

The AAMA 714 document also sets minimum durability requirements for these materials. Both the International Residential Code and the International Building Code reference AAMA 714.

Related Stories

Codes and Standards | May 6, 2021

Blue roofs can provide relief to overwhelmed stormwater systems

Benefits most evident in industrial commercial areas.

Codes and Standards | May 5, 2021

Majority of schools took steps to improve air quality during pandemic

Districts still have unmet needs, face high costs and outdated building infrastructure.

Codes and Standards | May 3, 2021

Fire stops critical to preserving three-decker housing

Old multi-family structures continue to provide badly needed homes in urban zones.

Codes and Standards | Apr 29, 2021

Dept. of Energy publishes energy savings analysis for ANSI/ASHRAE/IES Standard 90.1-2019

More than 4% savings for commercial buildings found for the updated code.

Codes and Standards | Apr 28, 2021

Building-integrated solar power turns buildings into power plants

Multiple alternatives could replace or complement rack-mounted PV arrays.

Codes and Standards | Apr 27, 2021

Ten real estate groups sign on to New York State’s high-rise decarbonization challenge

Each signee commits to carbon neutrality in one or more high-rise buildings it owns.

Codes and Standards | Apr 26, 2021

Dozens of companies, organizations call for Congress to double Energy Star funding

Despite broad support, program’s budget has steadily declined in recent years.

Codes and Standards | Apr 22, 2021

Alabama fire chiefs oppose proposal to change school building code oversight

Bill would move code compliance control from state to local boards.

Codes and Standards | Apr 21, 2021

After dry winter, California ramps up wildfire prevention efforts

State to spend half a billion dollars on projects including making buildings more fire resistant.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021