The Fenestration and Glazing Industry Alliance (FGIA) recently released an updated document on the value and effective application of plastic glazed skylights and sloped glazing in building design.
It includes the features and benefits of different plastic glazing materials. It is the second update to AAMA PSSG-20, Selection and Application Guide for Plastic Glazed Skylights and Sloped Glazing, originally published in 2016.
“Plastic glazed skylights and sloped glazing can be used to provide significant energy savings and enhance the aesthetic appearance of a building, as well as the appeal of its interior spaces, flooding them with the warmth and illumination of natural daylight,” wrote Neall Digert (Solatube) and John Westerfield (CrystaLite), two leaders of the Plastic Glazed Skylights and Sloped Glazing Review Task Group, in a news release.
This document is part of a suite of documents meant to educate interested parties in the proper design, selection, specification and use of skylights. The other AAMA skylight documents are:
· AAMA SDGS-1-89, Structural Design Guidelines for Aluminum Framed Skylights
· AAMA 1607-14, Voluntary Installation Guidelines for Unit Skylights
· TIR A7-11, Sloped Glazing Guidelines
· AAMA SSGPG-1-17, Structural Silicone Glazing (SSG) Design Guidelines
· AAMA GDSG-1-87, Glass Design for Sloped Glazing and Skylights
Related Stories
| Jan 16, 2013
New standard for geothermal heat pump systems piping to be included in 2015 International Mechanical Code
NSF International, an independent global organization that writes standards, and tests and certifies products, has published the first in a series of American National Standards for Ground-Source Geothermal Piping Systems – NSF/ANSI 358-1.
| Jan 16, 2013
ANSI passes new safety standards for reinforcing steel and post-tensioning
The ANSI A10 Accredited Standards Committee for Construction and Demolition Operations recently approved amendments to the ANSI A10.9 Concrete and Masonry Standard.
| Jan 8, 2013
Congress passes Drywall Safety Act
Congress recently passed the Drywall Safety Act; President Barack Obama is expected to sign it soon.
| Jan 8, 2013
Building-integrated PVs could help boost green standards over the next few years
A developing technology could begin to have an impact on sustainable standards over the next few years.
| Jan 8, 2013
Revamp of codes among nine low tech steps to raise community resiliency
Updating of local zoning and building codes is one of nine low-tech steps that can boost sustainability and storm resiliency, according to this article.
| Jan 8, 2013
Group releases safety and building codes from 24 countries
Public.Resource.Org released 10,062 public safety documents including building codes covering 24 countries and 6 regions.
| Jan 8, 2013
Montana developing high-performance building standards for state projects
The Montana Department of Administration is developing a single building standard for all state facilities, and hopes to have a plan in place this spring.
| Jan 4, 2013
AGC economist says "fiscal cliff" deal will give construction a boost
The deal in Congress to avoid going over the so-called fiscal cliff "should encourage many businesses to go ahead with projects they have held in reserve," said Ken Simonson, chief economist of the Associated General Contractors of America.
| Jan 4, 2013
California standards on furnishings, insulation to be revised
California is revising the state’s standards on interior furniture and insulation to maintain or improve fire safety while reducing or eliminating the use of toxic chemicals.
| Jan 4, 2013
Tilt-Up Concrete Association releases new temporary wind bracing guidelines
The Tilt-Up Concrete Association has released revised guidelines on Temporary Wind Bracing of Tilt-Up Concrete Panels During Construction.