The Fenestration and Glazing Industry Alliance (FGIA) recently released an updated document on the value and effective application of plastic glazed skylights and sloped glazing in building design.
It includes the features and benefits of different plastic glazing materials. It is the second update to AAMA PSSG-20, Selection and Application Guide for Plastic Glazed Skylights and Sloped Glazing, originally published in 2016.
“Plastic glazed skylights and sloped glazing can be used to provide significant energy savings and enhance the aesthetic appearance of a building, as well as the appeal of its interior spaces, flooding them with the warmth and illumination of natural daylight,” wrote Neall Digert (Solatube) and John Westerfield (CrystaLite), two leaders of the Plastic Glazed Skylights and Sloped Glazing Review Task Group, in a news release.
This document is part of a suite of documents meant to educate interested parties in the proper design, selection, specification and use of skylights. The other AAMA skylight documents are:
· AAMA SDGS-1-89, Structural Design Guidelines for Aluminum Framed Skylights
· AAMA 1607-14, Voluntary Installation Guidelines for Unit Skylights
· TIR A7-11, Sloped Glazing Guidelines
· AAMA SSGPG-1-17, Structural Silicone Glazing (SSG) Design Guidelines
· AAMA GDSG-1-87, Glass Design for Sloped Glazing and Skylights
Related Stories
| Apr 10, 2013
Concrete Reinforcing Steel Institute accredited by ANSI as standards developer
The Concrete Reinforcing Steel Institute (CRSI) was recently accredited by the American National Standards Institute (ANSI) as an ANSI Accredited Standards Developer (ASD).
| Apr 10, 2013
DOD should continue LEED-Silver or equivalent rating standard, says NRC
The Department of Defense should continue to require that its new buildings or major renovations to facilities be designed to achieve a LEED-Silver or equivalent rating, says a new report from the National Research Council.
| Apr 10, 2013
EPA proposes emissions rules affecting light construction vehicles
The Environmental Protection Agency has proposed air-pollution standards that it says will reduce the amount of sulfur in U.S. gasoline by two-thirds and impose fleet-wide pollution limits on new vehicles.
| Apr 10, 2013
New skyscraper designs raising the bar on green standards
Though most new skyscraper designs have a traditional look, they are including a wider array of sustainable elements to use energy and water more efficiently and improve human health.
| Apr 5, 2013
Lack of national standards on design of bioterror labs creates higher risk for accidents, panel says
U.S. labs that conduct research on bioterror germs such as anthrax are at risk for accidents because they do not have uniform design and operation standards, according to a Congressional investigative group.
| Apr 5, 2013
Builders Hardware Manuf. Assn. revises three standards for hinges, locks, and latches
The Builders Hardware Manufacturers Association (BHMA) released three new revisions to the ANSI/BHMA standardsfor hinges, interconnected locks, and sliding and folding hardware.
| Apr 5, 2013
New items to ASHRAE/IES energy standard open for public comment
The 2013 version of the ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low-Rise Residential Buildings, is scheduled for publication later this year, and 26 proposed addenda are open for public comment.
| Apr 5, 2013
No evidence that mandatory building energy labeling improves efficiency, study says
The Building Owners and Managers Association (BOMA) International and the Greater Boston Real Estate Board (GBREB) released a report, “An Economic Perspective on Building Labeling Policies,” that questions the efficacy of mandatory building energy labeling.
| Mar 27, 2013
Practical application of Legionella prevention standards the focus of ASHRAE project
An American Society of Heating, Refrigerating and Air-Conditioning Engineers committee drafting tough new standards to prevent the waterborne bacteria Legionella is focused on how to apply the standards in the real world.
| Mar 27, 2013
Open discussion of regulations on tap at AGC’s 2013 Federal Contractors Conference
The AGC Federal Contractors Conference provides a venue for contractors and federal agency personnel to meet in a collaborative forum to review federal construction contracting issues from around the United States.