flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Trends in U.S. commercial building size in three charts

Contractors

Trends in U.S. commercial building size in three charts

A new study by the U.S. Energy Information Administration shows that there were 5.6 million commercial buildings in the U.S. in 2012, totaling 87 billion sf of floor space. This is a 14% increase in floor space since 2003.


By BD+C Staff | May 8, 2015
Share of buildings in the South exceeds region’s share of U.S. population

Construction projects today tend to be larger nationwide. Photo: James Willamor/Flickr

A new study released by the U.S. Energy Information Administration reveals that the average size of new commercial buildings continue to grow. Size increases continued to outpace increases in the number of buildings over the past decade.

The data, documented in the administration’s Commercial Buildings Energy Consumption Survey (CBECS), estimates that there were 5.6 million commercial buildings in the United States in 2012, totaling 87 billion sf of floor space. This is a 14% increase in floor space since 2003, the last time CBECS results were recorded.

Newer buildings tend to be larger than older buildings. In particular, healthcare buildings, hospitality buildings, retail, and religious worship buildings today are larger. 

When broken up by region, the South experienced a lot of growth in building size, and the region’s share of buildings far exceeds its share of the U.S. population.

More information can be found on the Energy Information Administration’s website.

 

 

Related Stories

| Feb 2, 2012

Call for Entries: 2012 Building Team Awards. Deadline March 2, 2012

Winning projects will be featured in the May issue of BD+C. 

| Feb 2, 2012

VLK Architects selected for new Cypress, Texas elementary school

The Bridgeland Elementary School will be a new prototype school for the District. Designed to meet the requirements of The Collaborative for High Performance Schools.

| Feb 2, 2012

Mortenson Construction to build 2.4 MW solar project in North Carolina

Located on a 12 acre site in the Sandhills region, the 2.4 megawatt (MW) system is expected to generate approximately 3.5 million kilowatt hours (kWhs) of clean electricity on an annual basis.

| Feb 2, 2012

Shawmut Design and Construction launches sports venues division

Expansion caps year of growth for Shawmut.

| Feb 2, 2012

Fire rated glazing helps historic university preserve its past

When the University embarked on its first major addition since the opening of Hutchins Hall in 1933, preserving the Collegiate Gothic-style architecture was of utmost importance.

| Feb 2, 2012

Delk joins Gilbane Building Co.

Delk to focus on healthcare construction programs and highly complex higher education facilities for Gilbane Building Company’s Southwest region.

| Feb 2, 2012

Next phase of construction begins on Scripps Prebys Cardiovascular Institute

$456 million Institute will be comprehensive heart center for 21st Century.

| Feb 1, 2012

Increase notched in construction jobs, but unemployment rate still at 16%

AGC officials said that construction employment likely benefited from unseasonably warm weather across much of the country that extended the building season.

| Feb 1, 2012

Replacement windows eliminate weak link in the building envelope

Replacement or retrofit can help keep energy costs from going out the window.

| Feb 1, 2012

‘Augmented reality’ comes to the job site

A new software tool derived from virtual reality is helping Building Teams use the power of BIM models more effectively.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021