As programs of study in higher education must evolve to better prepare students for their chosen careers, so also must the environments in which they learn. Ontario’s Fleming College, established in the late 1960s, realized the need for a full overhaul of its main campus to stay competitive and to accommodate nearly seventeen thousand full and part-time students.
Commissioned to renovate the Sutherland Campus A-Wing building, the architectural firm Gow Hastings faced the challenge of renovation while students and faculty continued to use the facilities. Modernizing classrooms to provide updated curricula and common areas for comfort in study required a thorough evaluation of the building.
As originally built, the A-Wing lacked color and opportunities for natural lighting to brighten the interior. The previous dark brown cladding on the exterior, while consistent with the college’s environmental surroundings, appeared outdated and moody. One of the first steps in the revitalization involved stripping away the entire envelope down to its steel frames for a retrofit. During the specification of materials, the architects chose ALPOLIC MCM.
![Easy to perforate and install, ALPOLIC metal composite materials allow for regulation of natural light](/sites/default/files/inline-images/Interior%20view%20of%20Fleming%20College%20A%20Wing%20building%20with%20ALPOLIC%20MCM%20%281%29.jpg)
Nearly Limitless Design with Endless Finishes and Fabrication Possibilities
Thanks to a solid partnership with Sherwin Williams Coil Coatings, ALPOLIC’s ability to produce any hue onto their metal composite materials presented the Gow Hastings team with the desired colors for this project. Nearly 40,000 square feet of MCM in nine different finishes–including five different whites, two shades of yellow, charcoal, and Mica Anodic Clear–were fabricated and installed.
![Nine different ALPOLIC metal composite material finishes clad the renovated exterior of Fleming College's A Wing building](/sites/default/files/inline-images/Side%20view%20of%20Fleming%20College%20A%20Wing%20Building%20with%20ALPOLIC%20metal%20composite%20materials%20%281%29.jpg)
Rather than retrofit flat panels throughout the envelope as in the original design, Gow Hastings envisioned sections of the building with the MCM installed at different angles to create a visually stunning accordion effect. Panels installed over smaller windows were also perforated to draw natural light into the building, an attractive complement to the addition of floor-to-ceiling windows in the common pavilion areas.
![ALPOLIC MCM cladding on the renovated envelope of Fleming College A Wing building, installed at angles for aesthetic design](/sites/default/files/inline-images/Fleming%20College%20A%20Wing%20with%20ALPOLIC%20MCM%20exterior%20cladding%20%281%29.jpg)
The result presented a cheerful, colorful exterior indicative of the contemporary image Fleming College wished to project. Since its completion in 2020, the A-Wing Building has received several distinctions, among them recognition as a Finalist in the Public Space Design category of the 2021 SBID Awards and a Merit Award in ARCHITECT’s 2023 Architecture and Interiors Award for Adaptive Reuse.
MCM is Ideal for Retrofit Architectural Projects
Often, the decision to retrofit is inspired by a dedication to green building. To bring an older building up to current energy code standards, wrapping the building in continuous insulation and cladding with MCM delivers both energy efficiency and visual appeal. ALPOLIC’s virtually 100% recyclable materials are manufactured with sustainability in mind and come with some of the industry’s best finish warranties.
Retrofitting projects, as opposed to a complete tear-down and rebuild, is not only better for the environment but it can save money in the long run. Redesign with sustainable MCM and the cost savings can add up quickly—less upfront cost, low maintenance costs, less construction time, and the potential for improved energy efficiency. Composite is the ideal choice because of its design flexibility and the variety of colors and finishes.
Cladding existing facades with ALPOLIC MCM injects new life into a project and contributes to its increased energy efficiency and safety. As exemplified by Fleming College’s A Wing, the application of ALPOLIC metal composite materials modernizes a building’s appearance and the reputation of the campus. With infinite colors available, and the best warranty in the industry, ALPOLIC puts on a fresh, lasting face.
For more information on design and specification of MCM in contemporary architecture, schedule an AIA Lunch and Learn session. ALPOLIC presently offers four free accredited AIA/CES Learning Units (HSW).
Company Information:
ALPOLIC Metal Composite Materials
800.422.7270
info@alpolic.com
www.alpolic-americas.com
Related Stories
| Feb 26, 2013
CRSI releases new technical note on stainless steel reinforcing bars
The Concrete Reinforcing Steel Institute (CRSI) has released a new technical note, Frequently Asked Questions (FAQ) about Stainless Steel Reinforcing Bars, to its online collection.
| Jun 1, 2012
New BD+C University Course on Insulated Metal Panels available
By completing this course, you earn 1.0 HSW/SD AIA Learning Units.
| May 29, 2012
Reconstruction Awards Entry Information
Download a PDF of the Entry Information at the bottom of this page.
| May 24, 2012
2012 Reconstruction Awards Entry Form
Download a PDF of the Entry Form at the bottom of this page.
| Mar 7, 2012
LEO A DALY selected to design Minnesota Fallen Firefighters Memorial
The bronze, figurative sculpture of a firefighter rescuing a child, which is currently on display at the Minneapolis/St. Paul International Airport, is lit by natural light through a circular void in the monolith.
| Jan 9, 2012
METALCON International 2012 announced
METALCON 2012 is scheduled for Oct. 9-11 at the Donald E Stephens Convention Center, Hall A, Rosemont, Ill.
| Oct 18, 2011
Michel Bruneau wins 2012 AISC T.R. Higgins Award
The AISC T.R. Higgins Lectureship Award is presented annually by the American Institute of Steel Construction (AISC) and recognizes an outstanding lecturer and author whose technical paper(s) are considered an outstanding contribution to the engineering literature on fabricated structural steel.
| Apr 12, 2011
Metal cladding: Enhancing design with single-skin panels, MCMs, and IMPs
Single-skin metal panels, metal composite panels, and insulated metal panels can add both aesthetic and functional value to your projects, if you use them correctly.
| Apr 5, 2011
SSPC, AISC announce joint standard for paint shop certification
SSPC: The Society for Protective Coatings and the American Institute of Steel Construction (AISC) are pleased to announce a joint certification standard for shop application of protective coatings. The standard, "Certification Standard for Shop Application of Complex Protective Coating Systems," describes requirements for certification of firms that shop apply complex painting systems.