flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Tips to make optimal use of salvaged materials

Codes and Standards

Tips to make optimal use of salvaged materials

Integrated teams, staging warehouse, and looking early and often, among recommendations.


By Peter Fabris, Contributing Editor | July 16, 2020

Courtesy Pixabay

A Skanska executive offers 10 tips to make the best use of salvaged construction materials in a Living Building post. The advice includes:

· Early integration of the project team. This allows contractors to advise designers early on the practicality of using salvaged materials.

· Work with local reuse organizations. These groups obtain materials from deconstructed buildings and may have what you need close by.

· Look for opportunities to source materials. Even ordinary buildings contain materials that can be of use. Look early and often for these treasures.

· Obtain a staging warehouse. Setting aside a portion of a garage or other building, or renting a storage unit can fill the bill.

· Be ready in the schematic design phase. This is the best stage to analyze salvage possibilities.

· Know hurdles and limitations. Salvage projects may face technical challenges that don’t exist for new materials and products including warranties, specifications, and ratings for things like structural materials, mechanical equipment, and plumbing.

Related Stories

Codes and Standards | Dec 7, 2021

Design problems now the primary cause of construction claims and disputes

More likely to occur due to more tight timescales imposed upon third parties engaged in design.

Codes and Standards | Dec 5, 2021

New standard for Phase I environmental reports requires more research work on many sites

Update affects around 250,000 commercial real estate transactions a year.

Codes and Standards | Nov 30, 2021

Dept. of Energy publishes RFP for technical assistance on supporting better building codes

Addresses advanced standards to reduce energy consumption and GHG emissions.

Codes and Standards | Nov 29, 2021

FAA seeking design of air traffic control towers of the future

Call for design submissions for safe, efficient structures.

Codes and Standards | Nov 28, 2021

Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions

In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.

Codes and Standards | Nov 23, 2021

New York’s Labor Law Section 240 and how it affects general contractors

The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.

Codes and Standards | Nov 22, 2021

ABC’s Construction Technology Report finds focus on solving operational problems

More than half rely on project management software.

Codes and Standards | Nov 22, 2021

Contractors say 811 utility location system has significant flaws

More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.

Codes and Standards | Nov 19, 2021

Creating net-zero/net-positive buildings is top priority in Green Building Trends 2021 report

Findings also demonstrate compelling business case for building green.

boombox1
boombox2
native1

More In Category

Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021