Members of the U.S. House of Representatives and Senate are lining up behind a new bill that would promote the use of wood to construct tall buildings.
The Timber Innovation Act, which has the support of several lumber trade groups, was sponsored by members of both parties. The act would:
- Establish a performance driven research and development program for advancing tall wood building construction
- Authorize the Tall Wood Building Prize Competition through the U.S. Department of Agriculture (USDA)
- Create federal grants to support state, local, university and private sector education, outreach, research and development, including education and assistance for architects and builders
- Authorize technical assistance from USDA, in cooperation with states, to provide education and technical assistance for mass timber applications
- Incentivize the retrofitting of existing timber facilities located in areas with high unemployment rates to spur job creation in rural areas.
Tall, wood frame buildings are gaining popularity in Canada and Europe, in particular. The concept is somewhat controversial, however, with some fire chiefs concerned about the structures’ safety in the event of fire.
Related Stories
Codes and Standards | Oct 11, 2017
Data, transparency are keys to next steps in green building, says USGBC chief
Monitoring and comparing performance are critical to advancing sustainability goals.
Codes and Standards | Oct 10, 2017
New guidelines for quality control on application of membrane roof systems released
NRCA document provides guidance for on-site evaluation.
Codes and Standards | Oct 9, 2017
New app calculates maximum allowable heights for building occupancy types, classes of construction
The app streamlines compliance on various types of construction.
Codes and Standards | Oct 5, 2017
California lawmakers pass bill that requires GCs to pay wages of sub employees if subs fail to pay
The measure will go into effect in January if the governor signs it.
Codes and Standards | Oct 4, 2017
Ambitious but realistic increase in clean energy would cut GHG emissions by 80% in the U.S.
NRDC report says goal can be achieved with existing tools.
Codes and Standards | Oct 3, 2017
Reducing duct leakage is focus on latest green building standards updates
ASHRAE 189.1 broadens testing requirements to include more types of ducts.
Codes and Standards | Oct 2, 2017
Nationwide retrofit strategy in Canada could cut 51% of emissions from large buildings
The roadmap provides government and industry with a targeted plan.
Codes and Standards | Sep 28, 2017
Resources available for new OSHA respirable crystalline silica regulation
NRCA offers compliance tools for contractors.
Codes and Standards | Sep 28, 2017
New tool compares HVAC system efficiency
IAPMO and Hydronics Industry Alliance unveil BEST to evaluate systems in early design phase.
Codes and Standards | Sep 26, 2017
Anti-drone technology can ward off unauthorized drone flights
The technology can be used to prevent terrorist attacks and spying.