flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Test method for vertical fenestration installation procedures updated

Codes and Standards

Test method for vertical fenestration installation procedures updated

FGIA issues first update for document created in 2005.


By Peter Fabris, Contributing Editor | December 10, 2020

Courtesy Pixabay

The Fenestration and Glazing Industry Alliance (FGIA) has updated a test method evaluating the performance and durability of the integration of a fenestration product with a building envelope.

AAMA 504-20, Voluntary Laboratory Test Method to Qualify Vertical Fenestration Installation Procedures, was created in 2005. This marks the document’s first update.

Manufacturers should be aware that they are ultimately responsible for providing adequate installation instructions for their products, according to an FGIA news release. However, the document can serve as a guide.

“AAMA 504 provides a standardized test method for all manufacturers to verify their various installation instructions in a consistent manner,” said Joe Hayden vice chair of the Test Method to Qualify Installation Procedures Update Task Group and a Pella Corporation executive.

Related Stories

Codes and Standards | Sep 28, 2016

San Francisco commercial, multifamily regulations aim to reduce traffic volume

City planners will require design features to cut miles driven.

Codes and Standards | Sep 28, 2016

Society of Landscape Architects releases guide to resilient design

The goal is to retrofit communities to better withstand extreme weather events.

Codes and Standards | Sep 22, 2016

Construction firms pulling back from federal market due to new reporting rules

‘Subjective, very vague’ policies  are said to create too much risk.

Codes and Standards | Sep 21, 2016

Airbnb presents legal liability for multifamily owners

How building owners can reduce risks.

Codes and Standards | Sep 21, 2016

Healthy buildings becoming a key design priority for both architects and building owners

Nationwide survey finds nearly three of four architects cite health impacts influencing design decisions

Data Centers | Sep 19, 2016

New ANSI/ASHRAE data center standard is performance-based, more flexible

The aim of the standard was to ‘not stifle innovation.’

Codes and Standards | Sep 16, 2016

Calm weather tidal flooding impacting several communities on East and Gulf Coasts

Local officials face the prospect of costly mitigation projects.

Codes and Standards | Sep 15, 2016

OSHA appoints new director for its construction directorate

The forty-year industry veteran has been a GC and business owner.

Energy | Sep 13, 2016

Oberlin College to hold conference on post-fossil fuel economy

The gathering will address climate change and new sources of energy.

boombox1
boombox2
native1

More In Category


Contractors

Conflict resolution is a critical skill for contractors

Contractors interact with other companies seventeen times a day on average, and nearly half of those interactions (eight) involve conflicts, according to a report by Dodge Construction Network and Dusty Robotics. The study suggests that specialty trade contractors, in particular, rarely experience good resolution from conflicts. 



Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021