flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Test method for vertical fenestration installation procedures updated

Codes and Standards

Test method for vertical fenestration installation procedures updated

FGIA issues first update for document created in 2005.


By Peter Fabris, Contributing Editor | December 10, 2020

Courtesy Pixabay

The Fenestration and Glazing Industry Alliance (FGIA) has updated a test method evaluating the performance and durability of the integration of a fenestration product with a building envelope.

AAMA 504-20, Voluntary Laboratory Test Method to Qualify Vertical Fenestration Installation Procedures, was created in 2005. This marks the document’s first update.

Manufacturers should be aware that they are ultimately responsible for providing adequate installation instructions for their products, according to an FGIA news release. However, the document can serve as a guide.

“AAMA 504 provides a standardized test method for all manufacturers to verify their various installation instructions in a consistent manner,” said Joe Hayden vice chair of the Test Method to Qualify Installation Procedures Update Task Group and a Pella Corporation executive.

Related Stories

Codes and Standards | Aug 29, 2018

The 2018 IAPMO solar and swimming pool codes now available

For installation and inspection of public and private swimming pools, spas, and hot tubs.

Codes and Standards | Aug 28, 2018

New York’s green roof program needs reform

Despite incentives, few owners add vegetative roofs.

Codes and Standards | Aug 23, 2018

Cities promote deconstruction of old homes with mixed results

Market factors complicate efforts to recycle material from old structures.

Codes and Standards | Aug 22, 2018

Oregon is first state to change building code to allow tall mass timber buildings

Statewide alternate method allows early technical consideration and approval.

Codes and Standards | Aug 21, 2018

First mass timber panel made from structural composite lumber gets APA certification

Said to be much more cost effective than CLT options.

Codes and Standards | Aug 17, 2018

Zoning changes can be crucial to filling large, empty retail spaces

Alternative uses often require action by local officials.

Codes and Standards | Aug 16, 2018

Nearly a quarter of opioid overdose deaths attributable to construction workers

Massachusetts public health study finds pressure to work in pain contributes to problem.

Codes and Standards | Aug 15, 2018

ICC creates new committee on building safety and security

Will include experts from many different disciplines.

Codes and Standards | Aug 14, 2018

Philadelphia adopts 2018 IECC energy code, while state opts for 2015 code

City is one of the first jurisdictions to adopt newest code.

boombox1
boombox2
native1

More In Category


Contractors

Conflict resolution is a critical skill for contractors

Contractors interact with other companies seventeen times a day on average, and nearly half of those interactions (eight) involve conflicts, according to a report by Dodge Construction Network and Dusty Robotics. The study suggests that specialty trade contractors, in particular, rarely experience good resolution from conflicts. 



Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021