flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Technical brief addresses the impact of construction-generated moisture on commercial roofing systems

Codes and Standards

Technical brief addresses the impact of construction-generated moisture on commercial roofing systems

The free download offers suggestions for remediation actions.


By Peter Fabris, Contributing Editor | March 15, 2024
Photo by Nicholas Ismael Martinez on Unsplash

Photo by Nicholas Ismael Martinez on Unsplash

A new technical brief from SPRI, the trade association representing the manufacturers of single-ply roofing systems and related component materials, addresses construction-generated moisture and its impact on commercial roofing systems.

Construction-generated moisture comes from activities including pouring concrete, burning propane heaters, painting, plastering, and drywall finishing. These activities can contribute to excessive levels of relative humidity inside the structure when proper remediation measures are not taken. Accumulation of condensation within the roofing assembly and within the structure can result when the temperature is at or below the dew point.

To control moisture, designers must identify the sources of moisture and develop a remediation plan during the design process. To reduce the probability of condensation, buildings under construction must be adequately ventilated, particularly during concrete hydration and other high moisture-related construction activities.

SPRI recommendations include avoiding the use of wet materials or materials with excessive moisture, installing vapor retarders in the roof assembly, avoiding penetrating vapor barriers, installing at least two layers of insulation, and always sealing deck-to-wall joints and gaps around roof penetrations.

Related Stories

Codes and Standards | May 24, 2019

USGBC receives funding for LEED for Cities and Communities Program

Bank of America provides $500,000 grant to certify 15 U.S. cities.

Codes and Standards | May 24, 2019

AIA updates Interiors Contract Documents

Six revised documents available for interior construction projects.

Codes and Standards | May 23, 2019

Northern California casino offers a template for resilient microgrids

Solar power with batteries and backup generators provide weeks of self-reliance.

Codes and Standards | May 23, 2019

Austin creates innovative plan to boost affordable housing

Approach includes loosened zoning, incentives for higher density in lower-cost and mixed-income developments.

Codes and Standards | May 20, 2019

Effort launched to develop better process for zero-carbon retrofits in multifamily sector

Rocky Mountain Institute, Dept. of Energy, California Energy Commission join forces.

Codes and Standards | May 20, 2019

Property lenders shouldn’t invest for 30 years in most of Florida, expert warns

Climate ignorance driving some ‘insane’ deals.

Codes and Standards | May 17, 2019

NIMBYism is the biggest multifamily construction barrier

National Apartment Assn. report assesses reasons for difficulty in creating more apartments.

Codes and Standards | May 17, 2019

Dept. of Energy to award up to $33.5 million for advanced construction R&D

Focus is on techniques to reduce energy bills.

Codes and Standards | May 16, 2019

Mixed reviews on targeted tax break for San Francisco neighborhood

“Twitter tax break” may have worsened some of the area’s problems.

Codes and Standards | May 15, 2019

OSHA inspections to increase, says Secretary of Labor

Newly hired inspectors getting up to speed.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021