The new National Fire Protection Association (NFPA) 5000 Building Construction and Safety Code and NFPA 101 Life Safety Code have Allowances for larger and taller mass timber buildings.
“The addition of tall mass timber provisions to NFPA 5000 and NFPA 101 ensures compatibility with the International Building Code, thereby furthering the market opportunity for tall mass timber buildings,” said American Wood Council (AWC) Vice President of Codes & Regulations Kenneth Bland, P.E., in a news release. “NFPA’s recognition of tall mass timber furthers the availability of a low-embodied carbon alternative compared to traditional building materials.”
The new code is the result of a three-year process to review mass timber. Several NFPA Technical Committees with responsibility for building construction provisions developed new tall mass timber provisions.
The new provisions are intended to eliminate conflicts that can occur when compliance with both the IBC and NFPA 101 is required. The updated NFPA codes are expected to be available later this year.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.