flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Survey: Number of licensed architects grows in 2012-13

Survey: Number of licensed architects grows in 2012-13

A survey by NCARB shows that there are 105,847 registered architects in the U.S., up slightly from the organization's 2011-2012 survey.


By NCARB | December 30, 2013
Photo: Khunaspix; Freedigitalphotos.net
Photo: Khunaspix; Freedigitalphotos.net
The 2013 survey of U.S. architectural registration boards by NCARB indicates that there are currently 105,847 registered architects in the United States. This represents a 0.24% increase in licensed architects from last year’s survey. Data were collected in fall 2013 from the jurisdictions and reflects July 2012 through June 2013.
 
The 2013 survey also reveals that there are 121,535 reciprocal (out-of state) architects, for a total of 227,382 registrations. This represents an increase of 3% in reciprocal licenses, and a 1.69% increase in overall registrations. California has the highest number of resident architects (16,191) and the highest number of total registrations (19,899).
 
NCARB collects data for the survey from its 54 Member Boards, which includes all 50 states, the District of Columbia, Guam, Puerto Rico, and the U.S. Virgin Islands. NCARB makes this information available annually as a service to the profession. For more information about the 2013 Survey of Registered Architects, contact NCARB at 202.783.6500.

 

Jurisdiction Resident Reciprocal Total
Alabama 901 1,853 2,754
Alaska 257 365 622
Arizona * 2,164 3,897 6,061
Arkansas 495 850 1,345
California 16,191 3,708 19,899
Colorado 3,256 3,225 6,481
Connecticut 1,514 2,794 4,308
Delaware 118 1,538 1,656
District of Columbia 699 2,426 3,125
Florida 4,491 4,427 8,918
Georgia *** 2,404 2,952 5,356
Guam 33 74 107
Hawaii 1,027 1,345 2,372
Idaho 491 1,173 1,664
Illiniois 5,306 3,740 9,046
Indiana 1,056 1,836 2,892
Iowa 1,106 2,482 3,588
Kansas 936 1,838 2,774
Kentucky ** 718 1,641 2,359
Louisiana 1,213 2,038 3,251
Maine 425 1,094 1,519
Maryland 1,995 3,745 5,740
Massachusetts 3,715 2,912 6,627
Michigan * 2,570 3,132 5,702
Minnesota 1,947 1,534 3,481
Mississippi 364 1,512 1,876
Missouri 2,055 3,015 5,070
Montana 441 957 1,398
Nebraska 546 1,234 1,780
Nevada 530 2,240 2,770
New Hampshire 311 1,487 1,798
New Jersey 3,096 4,896 7,992
New Mexico 712 1,493 2,205
New York 9,707 6,808 16,515
North Carolina * 2,248 2,921 5,169
North Dakota 154 856 1,010
Ohio 2,650 3,929 6,579
Oklahoma 763 1,281 2,044
Oregon 1,654 1,284 2,938
Pennsylvania **** 3,653 4,326 7,979
Puerto Rico *** 609 126 735
Rhode Island 310 1,266 1,576
South Carolina * 1,066 2,698 3,764
South Dakota 111 697 808
Tennessee 1,514 2,206 3,720
Texas 8,427 4,374 12,801
Utah 827 1,697 2,524
Vermont 289 729 1,018
Virgin Islands 163 948 1,111
Virginia 2,790 4,221 7,011
Washington 3,866 2,314 6,180
West Virginia 100 1,037 1,137
Wisconsin * 1,727 3,361 5,088
Wyoming 136 1,003 1,139
TOTAL 105,847 121,535 227,382
 

* Counts are from 2012 data
** Counts are from 2011 data
*** Counts are from 2010 data
**** Resident counts from 2013 data

######

Related Stories

High-rise Construction | Jun 23, 2015

The world's best new skyscrapers for 2015

One World Trade Center and Abu Dhabi's Burj Mohammed Bin Rashid Tower are among the four towers named Best Tall Buildings by the Council on Tall Buildings and Urban Habitat.

Museums | Jun 23, 2015

Moreau Kusunoki's 'art in the city' scheme wins Guggenheim Helsinki design competition

The firm’s design concept makes use of the museum’s site, turning it into a bustling, well-connected waterfront hub.

Architects | Jun 22, 2015

NCARB adopts alternative for certification of foreign architects

The change, effective July 1, 2016, will replace the current BEFA Program’s requirements, eliminating the committee dossier review and the need to document seven years of credentialed practice in a foreign country.

BIM and Information Technology | Jun 21, 2015

11 tips for mastering 3D printing in the AEC world

Early adopters provide first-hand advice on the trials and tribulations of marrying 3D printing with the science of building technology.

Events Facilities | Jun 19, 2015

4 ways convention centers are revamping for the 21st century

Today's convention centers require more flexible spaces, the ability to blend virtual and in-person events, and meaningful sustainability, writes Skanska's Tom Tingle.

Engineers | Jun 18, 2015

Architecture and engineering profit margins deliver third consecutive year of growth

Operating profits of AE firms have reach their highest level since 2009, according to a new report by PSMJ Resources.

Architects | Jun 17, 2015

Starchitects' napkin sketches raise thousands for San Diego’s AIAS chapter

  Prominent architects who submitted a total of 23 napkin doodles were Zaha Hadid, Cesar Pelli, Robert Venturi, Massimiliano Fuksas, Thom Mayne, and Bjarke Ingels. 

BIM and Information Technology | Jun 16, 2015

What’s next for 3D printing in design and construction?

The 3D printer industry keeps making strides in technology and affordability. Machines can now print with all sorts of powderized materials, from concrete to chocolate. 

Office Buildings | Jun 12, 2015

Houston's energy sector keeps office construction humming

Colliers International projects continued expansion this year in its quarterly report on national office market. 

Smart Buildings | Jun 11, 2015

Google launches company to improve city living

The search engine giant is yet again diversifying its products. Google has co-created a startup, called Sidewalk Labs, that will focus on “developing innovative technologies to improve cities.”

boombox1
boombox2
native1

More In Category



Codes and Standards

New FEMA rules include climate change impacts

FEMA’s new rules governing rebuilding after disasters will take into account the impacts of climate change on future flood risk. For decades, the agency has followed a 100-year floodplain standard—an area that has a 1% chance of flooding in a given year.


Construction Costs

Data center construction costs for 2024

Gordian’s data features more than 100 building models, including computer data centers. These localized models allow architects, engineers, and other preconstruction professionals to quickly and accurately create conceptual estimates for future builds. This table shows a five-year view of costs per square foot for one-story computer data centers. 

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021