A new study commissioned by Certain Teed Corp., “Factors Impacting Low-Slope Roofing Costs: A National Labor Study,” compares the amount of labor needed to complete various low-slope roofing project types.
A bituminous roof with a mechanically attached base and self-adhered cap took the fewest labor hours to install. The most labor-intensive roofing type was bituminous with a hot asphalt mopped base and a hot asphalt mopped cap.
The independent, five-year nationwide study found that the type of roof covering, project parameters, tool management, and crew efficiency are all major factors impacting contractor profits. Poorly managed crews, faulty tools and extreme climates will increase installation time, regardless of product selection, the study says.
The study is intended to help roofing contractors optimize allocation of labor from existing crews. It is also a reference contractors can use to compare their labor costs to a current, comprehensive national average.
Related Stories
Codes and Standards | Mar 27, 2018
Los Angeles appoints its first chief design officer
Responsibility for enhancing civic architecture and urban design.
Codes and Standards | Mar 26, 2018
National Roofing Contractors Assn., releases updates to its Roof Wind Designer app
Significant changes to online wind-load calculator.
Codes and Standards | Mar 22, 2018
Global construction waste to almost double by 2025
Concerns in Houston, Minnesota over environmental impacts.
Codes and Standards | Mar 21, 2018
Cape Town, South Africa’s dire water supply crisis raises concerns in the U.S.
Los Angeles, Salt Lake City, and Miami among cities at risk for water shortages.
Codes and Standards | Mar 20, 2018
Report shows how LEED certification supports net zero energy
Whole-building energy simulation, ASHRAE compliance requirement are key factors.
Codes and Standards | Mar 15, 2018
Energy efficiency measures contributing to flat demand for power
Utilities having difficulty adjusting to new business environment.
Codes and Standards | Mar 14, 2018
New parking lighting technology is paying off, Energy Dept. says
Newer products can cut energy costs by as much as 70%.
Codes and Standards | Mar 13, 2018
OSHA delays enforcement of beryllium exposure rule
The Occupational Safety and Health Administration (OSHA) voted to delay new beryllium exposure rules until May 11.
Codes and Standards | Mar 12, 2018
L.A. mayor proposes mandatory seismic retrofits for steel buildings, daycare centers, private schools
Los Angeles Mayor Eric Garcetti has proposed a seismic retrofit requirement for vulnerable steel buildings built before the 1994 Northridge earthquake.
Codes and Standards | Mar 8, 2018
Net zero commercial building trend shows strong momentum
Almost 50% more zero energy commercial buildings under construction in 2017.