flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Steel industry, labor urge Biden to retain steel tariffs

Codes and Standards

Steel industry, labor urge Biden to retain steel tariffs

‘Essential to ensuring the viability of the domestic steel industry.’


By Peter Fabris, Contributing Editor | January 20, 2021

Courtesy Pixabay

Four domestic steel industry associations and the United Steelworkers union have urged President-elect Joe Biden to ensure steel tariffs and quotas are kept in place.

The tariffs and quotas were enacted in 2018 by the Trump Administration. A letter to Biden from the American Iron and Steel Institute (AISI), Steel Manufacturers Association (SMA), the United Steelworkers union (USW), The Committee on Pipe and Tube Imports (CPTI), and American Institute of Steel Construction (AISC) says: “Continuation of the [steel] tariffs and quotas is essential to ensuring the viability of the domestic steel industry in the face of massive and growing excess steel capacity.

“Removing or weakening of these measures before major steel producing countries eliminate their overcapacity—and the subsidies and other trade-distorting policies that have fueled the steel crisis—will only invite a new surge in imports with devastating effects to domestic steel producers and their workers.”

China, Vietnam, and Turkey, among others, continue to increase their steel production even as the pandemic has caused demand for steel to drop around the world, according to a news release from the steel coalition. Korea, Russia, Ukraine, Indonesia and others continue to export large shares of their steel production to other markets, the release says.

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021