flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Steel Framing Alliance updates ‘Thermal Design and Code Compliance for Cold-Formed Steel Walls’ design guide

Codes and Standards

Steel Framing Alliance updates ‘Thermal Design and Code Compliance for Cold-Formed Steel Walls’ design guide

Includes results of new tests and addresses IECC and ASHRAE compliance paths.


By Peter Fabris, Contributing Editor | June 11, 2015
Steel Framing Alliance updates ‘Thermal Design and Code Compliance for Cold-Formed Steel Walls’ design guide

The Steel Framing Alliance updated its "Thermal Design and Code Compliance for Cold-Formed Steel Walls" design guide. Image: Pixabay

The Steel Framing Alliance (SFA) has published “Thermal Design and Code Compliance for Cold-Formed Steel Walls, 2015 Edition.” 

This document updates the 2008 edition of “Thermal Design Guide for Exterior Walls.” It integrates the results of extensive hot box tests of cold-formed steel wall assemblies to provide up-to-date, accurate methods for determining the thermal performance of wall assemblies. 

It also addresses compliance paths and requirements for the two most widely used energy codes and standards in North America―the 2015 International Energy Conservation Code and ASHRAE 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings. 

The new design guide is available free of charge at the Cold-Formed Steel Engineers Institute (CFSEI) website at www.cfsei.org.

Related Stories

Codes and Standards | Jul 19, 2021

Lack of information on carbon emissions challenges construction industry

Reports recommends whole-life carbon assessments on building projects.

Codes and Standards | Jul 15, 2021

Three drywall code-referenced publications have been updated

Include guidance on fire resistance, sound control, application, and finishing.

Codes and Standards | Jul 14, 2021

Biden’s infrastructure proposal includes massive investment in school buildings

‘Once in a lifetime opportunity’ to upgrade HVAC and other key systems.

Codes and Standards | Jul 13, 2021

Reluctance to fund maintenance on older condos is a serious problem

Owner associations defer needed work, putting properties at risk.

Codes and Standards | Jul 12, 2021

Regulations on hydrofluorocarbons reduce roof insulation options

Canada, some U.S. states ban HFC blowing agents used in closed-cell foam.

Codes and Standards | Jul 8, 2021

New York City shuts down 322 construction sites for unsafe conditions

Action comes as inspectors visit more than 2,100 sites.

Codes and Standards | Jul 7, 2021

Bechtel, Nautilus partner on sustainable, high-performance data centers

Facilities would use 70% less power for cooling, eliminate consumption of drinking water.

Codes and Standards | Jul 7, 2021

Surfside condo collapse could spur new legislation

Natl. Institute of Standards and Technology is investigating.

Codes and Standards | Jul 7, 2021

Intl. Code Council appoints committees to lead energy code development

One-third of appointees are government regulators.

boombox1
boombox2
native1

More In Category


Contractors

Conflict resolution is a critical skill for contractors

Contractors interact with other companies seventeen times a day on average, and nearly half of those interactions (eight) involve conflicts, according to a report by Dodge Construction Network and Dusty Robotics. The study suggests that specialty trade contractors, in particular, rarely experience good resolution from conflicts. 



Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021