flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

State legislature fails to pass law to extend design-build for New York City projects

Codes and Standards

State legislature fails to pass law to extend design-build for New York City projects

Would have allowed five city agencies to use alternate delivery method.


By Peter Fabris, Contributing Editor | July 5, 2016
State legislature fails to pass law to extend design-build for New York City projects

Photo: Thomas Hawk/Creative Commons.

Despite proponents’ high expectations, the New York Legislature failed to pass the New York City Public Works Investment Act, which would have extended the authority to use design-build contracts to five New York City agencies.

The Act reportedly had bi-partisan support and had been amended to guarantee project labor agreements. After being tweaked, it was backed by labor and trades groups including the New York Building Congress, Partnership for New York City, the Real Estate Board, the Building and Construction Trades Council of Greater New York, the NYC Central Labor Council, DC 37, and the General Contractors Association.

The bill also had support from several think tanks and good government groups. The bill died when members of the Assembly and Senate could not resolve differences over a few provisions. Some Assembly members reportedly objected to a lack of provisions for minority and women-owned businesses.

A spokesperson for the mayor said design-build would have aided efforts to update aging infrastructure and build new schools and public housing in the city.

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021