The ConsensusDocs Coalition is offering the first standard contract document that addresses prefabricated construction.
ConsensusDocs 753 Standard Prefabricated Construction Contract addresses the most common use-case scenario of prefabricated construction in which a constructor, general contractor, design-builder, or construction manager contracts with a prefabricator to fabricate a component off site that is later installed on a worksite. Industry leaders, including the Modular Building Institute (MBI) and volunteers and staff from National Institute of Building Sciences (NIBS), Off-Site Construction Council, developed the document over two years.
“While prefabricated construction or modular building has been around for decades, important contractual and legal issues have remained unaddressed in most construction contracts,” according to a ConsensusDocs news release.
“The new ConsensusDocs Prefabricated construction contract advances the understanding and risk allocation desperately needed because prefabricated construction is revolutionizing the way construction will occur in a post pandemic construction world,” said Ron Ciotti, a partner with Hinkley Allen.
“This is one of the most anticipated contracts in ConsensusDocs history because there is a glaring need to address the growing trend of prefabricated construction or modular building, and current contracting practices simply do not cut it,” added ConsensusDocs Executive Director and Senior Counsel Brian Perlberg.
Related Stories
| Feb 6, 2013
BOMA favors voluntary energy benchmarking and disclosure, opposes mandates
The Building Owners and Managers Association (BOMA) International announced support for voluntary energy benchmarking, but said it opposes mandates for benchmarking, disclosure, and labeling that many states and municipalities are implementing.
| Feb 6, 2013
Lumber Standard Committee approves new Southern Pine design value changes
The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.
| Feb 6, 2013
CEIR seeks public input on draft of PV racking and attachment document
The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.
| Feb 6, 2013
Insurance Institute demonstration shows advantages of following wind resistance standards
A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.
| Jan 31, 2013
Proposed ASHRAE legionellosis prevention standard open for third public comment
Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.
| Jan 31, 2013
More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert
The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.
| Jan 31, 2013
California Building Standards Commission adopts 2013 code update
The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.
| Jan 25, 2013
D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives
The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.
| Jan 25, 2013
Energy modeling needed to overcome ‘plug load problem’ to meet high green standards
Plug loads illustrate how much end-users impact overall building energy use.
| Jan 25, 2013
ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2
A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.
