flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Standard for assessing frame deflection using one component polyurethane foams updated

Codes and Standards

Standard for assessing frame deflection using one component polyurethane foams updated

The standard offers guidance when installing fenestration products.


By Peter Fabris, Contributing Editor | September 6, 2019
Standard for assessing frame deflection using one component polyurethane foams updated

Photo: Pixabay

  

The American Architectural Manufacturers Association (AAMA) has updated a standard that providing guidance for installing fenestration products.

AAMA 812-19, “Voluntary Practice for Assessment of Frame Deflection When Using One Component Polyurethane Foams for Air-Sealing Rough Openings of Fenestration Installations,” was last updated in 2010. One component polyurethane foams have sometimes been associated with frame deflection of fenestration products.

This can result from either misapplication or the use of foams not suited to the purpose. One component polyurethane foams have been developed specifically for application with fenestration products to eliminate these incidents.

“The AAMA 812 has been updated to clarify foam physical properties, enhance sample preparation, testing and measurement procedures, and include requirements for reporting of test results,” said Beverly Selle (Dow Chemical Company), chair of the AAMA 812 Insulating Expanding Foams Task Group, in an AAMA news release.

The standard identifies pressure build and dimensional stability as the key attributes that contribute to deflection of fenestration products resulting from the use of one component polyurethane foams, and provides test protocols for assessing these key attributes.

Related Stories

Codes and Standards | Sep 30, 2021

U.S. has a deficit of 5 million homes

Builders unable to keep pace with demand.

Codes and Standards | Sep 29, 2021

Mass Timber group study will compare structural round timber to glulam products and steel

Will compare costs, capabilities, and carbon impacts of structural materials.

Codes and Standards | Sep 28, 2021

Massachusetts creates Commission on Clean Heat

First-of-its kind body to set targets for buildings to reduce emissions from heating fuels.

Codes and Standards | Sep 27, 2021

Commercial real estate industry faces SEC climate disclosure regulations

Risks associated with climate change would have to be revealed.

Codes and Standards | Sep 22, 2021

Group proposes Carbon Use Intensity metric for new buildings

Plan would track embedded carbon on projects.

Codes and Standards | Sep 22, 2021

Cities need to step up flood mitigation efforts to save lives

Recent storms highlight climate change dangers.

Codes and Standards | Sep 21, 2021

Steps to improve ventilation for Covid can combat colds and flu

New look at airborne disease spread shows time viruses linger in air may have been underestimated.

Codes and Standards | Sep 15, 2021

USGBC will change leaders, conduct strategic review

Aims to ensure organization is ‘well positioned to scale its work in the post-pandemic world’.

Codes and Standards | Sep 15, 2021

LEED-certified offices earn higher rents than non-sustainable properties

Are also more resilient to dips in real estate market.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021