flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

St. Louis is first Midwest city to pass building energy performance standard

Codes and Standards

St. Louis is first Midwest city to pass building energy performance standard

Allows owners broad flexibility on how to achieve goals.


By Peter Fabris, Contributing Editor | May 20, 2020

Courtesy Pixabay

Buildings in St. Louis will have to meet energy efficiency standards after the city became the first in the Midwest to pass a building energy performance standard.

The fourth major city in the country to pass such a standard, St. Louis will allow “broad flexibility” on how owners can achieve efficiency goals, according to a post by the Natural Resources Defense Council. The legislation establishes incrementally increasing energy-saving targets for buildings with the goal of eliminating community-wide greenhouse gas emissions by 2050.

Buildings account for about 80% of St. Louis’s emissions. Site Energy Use Intensity (EUI) will be the chief performance metric under the new standard which covers buildings 50,000 sf or larger. Buildings of that size have been required to report energy and water use since 2017 in St. Louis.

Building performance standards enable cities to achieve multiple city priorities such as carbon reductions, building electrification, energy efficiency, and peak demand reductions.

Related Stories

| Feb 9, 2012

Initiative to sell off under-used federal property gaining momentum

The bill is similar to a White House planto cut $8 billion worth of building costs by the end of the 2012 fiscal year, and to establish a panel to identify other sites worth selling or donating to nonprofits or state and local governments.

| Feb 9, 2012

Computer tool helps engineers design roof cladding using Canada's building code

Easier to design roof cladding that can withstand winds in a given area. 

| Feb 9, 2012

Webinar focuses on lessons learned from LEED-certified industrial project

This case study will focus on strategies used to save the client money, achieve certification, and effectively market success once the project was complete.

| Feb 9, 2012

Rapid growth of zero energy buildings expected

Much of that growth will be in the European Union, where near-zero energy buildings are mandated by 2019 for public buildings, and by 2021 for all construction.

| Feb 9, 2012

Stiffer OSHA fines put strain on Kansas contractors

A fine for a violation that once cost between $750 and $1,200 now runs $7,000 or more per incident, according to a state industry association official.

| Feb 9, 2012

Webinar focuses on lessons learned from LEED-certified industrial project

A Construction Specifications Institute webinar will focus on the lessons learned through the design and construction of a LEED-certified industrial project, Better Living Mill Shop, the first industrial building in Central Virginia to earn LEED certification.

| Feb 8, 2012

California likely to eliminate redevelopment agencies

Leaders of California cities had been trying to fashion a compromise with lawmakers after the state Supreme Court ruled the state had the authority to eliminate the agencies and use their property tax money for local services.

| Feb 8, 2012

Project aimed at economical seismic retrofits on historic Memphis structures

The group will develop a low-cost seismic retrofit model that would benefit aging brick-and-mortar structures. It involves bolting steel brackets to existing wooden floor and ceiling joists.

| Feb 8, 2012

Houston signs on to Better Buildings Challenge

The challenge has about $4 billion in federal and private-sector funds, which it will use for building energy upgrades nationwide in the next two years.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021