flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

St. Louis is first Midwest city to pass building energy performance standard

Codes and Standards

St. Louis is first Midwest city to pass building energy performance standard

Allows owners broad flexibility on how to achieve goals.


By Peter Fabris, Contributing Editor | May 20, 2020

Courtesy Pixabay

Buildings in St. Louis will have to meet energy efficiency standards after the city became the first in the Midwest to pass a building energy performance standard.

The fourth major city in the country to pass such a standard, St. Louis will allow “broad flexibility” on how owners can achieve efficiency goals, according to a post by the Natural Resources Defense Council. The legislation establishes incrementally increasing energy-saving targets for buildings with the goal of eliminating community-wide greenhouse gas emissions by 2050.

Buildings account for about 80% of St. Louis’s emissions. Site Energy Use Intensity (EUI) will be the chief performance metric under the new standard which covers buildings 50,000 sf or larger. Buildings of that size have been required to report energy and water use since 2017 in St. Louis.

Building performance standards enable cities to achieve multiple city priorities such as carbon reductions, building electrification, energy efficiency, and peak demand reductions.

Related Stories

Codes and Standards | Feb 12, 2015

ASHRAE, USGBC, IES consider biomass requirements in green building standard

The proposal would add biomass to approved renewables.

Codes and Standards | Feb 12, 2015

New Appraisal Institute form aids in analysis of green commercial building features

The Institute’s Commercial Green and Energy Efficient Addendum offers a communication tool that lenders can use as part of the scope of work. 

Codes and Standards | Feb 8, 2015

ASHRAE, IAQA approve consolidation

Under the consolidation, IAQA will become a part of the ASHRAE organization while maintaining its own brand and Board of Directors.

Codes and Standards | Feb 6, 2015

Obama executive order requires federal construction projects to consider flood damage caused by climate change

To meet the new standard, builders must build two feet above the currently projected elevation for 100-year floods for most projects.

HVAC | Feb 6, 2015

ASHRAE, REHVA publish guide to chilled beam systems

The guide provides tools and advice for designing, commissioning, and operating chilled-beam systems.

Codes and Standards | Feb 2, 2015

AGC working with EPA on website to help with environmental rule compliance

The goal is for the site to be improved to make it easier for construction contractors to learn how to comply with federal and state environmental guidelines.

| Feb 2, 2015

New York law requires informing firefighters of wood truss construction

New York enacted a law that could make firefighting a bit safer by mandating property owners inform government and first-responders when they build or rehabilitate a building using "truss-type" pre-engineered wood or timber.

| Jan 14, 2015

Ontario code changes boost accessibility for people with disabilities

The new amended Ontario building code includes several provisions that improve accessibility for those with disabilities.

| Jan 14, 2015

American Concrete Institute releases Spanish edition of structural concrete code

New York City last year adopted the National Institute of Standards and Technology (NIST) recommendation to require additional exit stairways in high-rise buildings.

| Jan 14, 2015

Terrorism Risk Insurance Act renewed

President Barack Obama signed the Terrorism Risk Insurance Act law on Jan. 12.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021